1. An overview of data protection

General information

The following information will provide you with an easy to navigate overview of what will happen with your personal data when you visit this website. The term “personal data” comprises all data that can be used to personally identify you. For detailed information about the subject matter of data protection, please consult our Data Protection Declaration, which we have included beneath this copy.

Data recording on this website

Who is the responsible party for the recording of data on this website (i.e., the “controller”)?

The data on this website is processed by the operator of the website, whose contact information is available under section “Information about the responsible party (referred to as the “controller” in the GDPR)” in this Privacy Policy.

How do we record your data?

We collect your data as a result of your sharing of your data with us. This may, for instance be information you enter into our contact form.

Other data shall be recorded by our IT systems automatically or after you consent to its recording during your website visit. This data comprises primarily technical information (e.g., web browser, operating system, or time the site was accessed). This information is recorded automatically when you access this website.

What are the purposes we use your data for?

A portion of the information is generated to guarantee the error free provision of the website. Other data may be used to analyze your user patterns.

What rights do you have as far as your information is concerned?

You have the right to receive information about the source, recipients, and purposes of your archived personal data at any time without having to pay a fee for such disclosures. You also have the right to demand that your data are rectified or eradicated. If you have consented to data processing, you have the option to revoke this consent at any time, which shall affect all future data processing. Moreover, you have the right to demand that the processing of your data be restricted under certain circumstances. Furthermore, you have the right to log a complaint with the competent supervising agency.

Please do not hesitate to contact us at any time if you have questions about this or any other data protection related issues.

Analysis tools and tools provided by third parties

There is a possibility that your browsing patterns will be statistically analyzed when your visit this website. Such analyses are performed primarily with what we refer to as analysis programs.

For detailed information about these analysis programs please consult our Data Protection Declaration below.

2. Hosting

We are hosting the content of our website at the following provider:

External Hosting

This website is hosted externally. Personal data collected on this website are stored on the servers of the host. These may include, but are not limited to, IP addresses, contact requests, metadata and communications, contract information, contact information, names, web page access, and other data generated through a web site.

The external hosting serves the purpose of fulfilling the contract with our potential and existing customers (Art. 6(1)(b) GDPR) and in the interest of secure, fast, and efficient provision of our online services by a professional provider (Art. 6(1)(f) GDPR). If appropriate consent has been obtained, the processing is carried out exclusively on the basis of Art. 6 (1)(a) GDPR and § 25 (1) TTDSG, insofar the consent includes the storage of cookies or the access to information in the user’s end device (e.g., device fingerprinting) within the meaning of the TTDSG. This consent can be revoked at any time.

Our host(s) will only process your data to the extent necessary to fulfil its performance obligations and to follow our instructions with respect to such data.

We are using the following host(s):

LVIT GmbH
Nördliche Münchner Str. 47
82031 Grünwald

Data processing

We have concluded a data processing agreement (DPA) for the use of the above-mentioned service. This is a contract mandated by data privacy laws that guarantees that they process personal data of our website visitors only based on our instructions and in compliance with the GDPR.

3. General information and mandatory information

Data protection

The operators of this website and its pages take the protection of your personal data very seriously. Hence, we handle your personal data as confidential information and in compliance with the statutory data protection regulations and this Data Protection Declaration.

Whenever you use this website, a variety of personal information will be collected. Personal data comprises data that can be used to personally identify you. This Data Protection Declaration explains which data we collect as well as the purposes we use this data for. It also explains how, and for which purpose the information is collected.

We herewith advise you that the transmission of data via the Internet (i.e., through e-mail communications) may be prone to security gaps. It is not possible to completely protect data against third-party access.

Information about the responsible party (referred to as the “controller” in the GDPR)

The data processing controller on this website is:

Industriestrasse 4-12
35683 Dillenburg
Deutschland
E-Mail: dsb@linde-wiemann.com

Phone: +49 2771 392 0
E-mail: info@linde-wiemann.com

The controller is the natural person or legal entity that single-handedly or jointly with others makes decisions as to the purposes of and resources for the processing of personal data (e.g., names, e-mail addresses, etc.).

Storage duration

Unless a more specific storage period has been specified in this privacy policy, your personal data will remain with us until the purpose for which it was collected no longer applies. If you assert a justified request for deletion or revoke your consent to data processing, your data will be deleted, unless we have other legally permissible reasons for storing your personal data (e.g., tax or commercial law retention periods); in the latter case, the deletion will take place after these reasons cease to apply.

General information on the legal basis for the data processing on this website

If you have consented to data processing, we process your personal data on the basis of Art. 6(1)(a) GDPR or Art. 9 (2)(a) GDPR, if special categories of data are processed according to Art. 9 (1) DSGVO. In the case of explicit consent to the transfer of personal data to third countries, the data processing is also based on Art. 49 (1)(a) GDPR. If you have consented to the storage of cookies or to the access to information in your end device (e.g., via device fingerprinting), the data processing is additionally based on § 25 (1) TTDSG. The consent can be revoked at any time. If your data is required for the fulfillment of a contract or for the implementation of pre-contractual measures, we process your data on the basis of Art. 6(1)(b) GDPR. Furthermore, if your data is required for the fulfillment of a legal obligation, we process it on the basis of Art. 6(1)(c) GDPR. Furthermore, the data processing may be carried out on the basis of our legitimate interest according to Art. 6(1)(f) GDPR. Information on the relevant legal basis in each individual case is provided in the following paragraphs of this privacy policy.

Information on data transfer to the USA and other non-EU countries

Among other things, we use tools of companies domiciled in the United States or other from a data protection perspective non-secure non-EU countries. If these tools are active, your personal data may potentially be transferred to these non-EU countries and may be processed there. We must point out that in these countries, a data protection level that is comparable to that in the EU cannot be guaranteed. For instance, U.S. enterprises are under a mandate to release personal data to the security agencies and you as the data subject do not have any litigation options to defend yourself in court. Hence, it cannot be ruled out that U.S. agencies (e.g., the Secret Service) may process, analyze, and permanently archive your personal data for surveillance purposes. We have no control over these processing activities.

Revocation of your consent to the processing of data

A wide range of data processing transactions are possible only subject to your express consent. You can also revoke at any time any consent you have already given us. This shall be without prejudice to the lawfulness of any data collection that occurred prior to your revocation.

Right to object to the collection of data in special cases; right to object to direct advertising (Art. 21 GDPR)

IN THE EVENT THAT DATA ARE PROCESSED ON THE BASIS OF ART. 6(1)(E) OR (F) GDPR, YOU HAVE THE RIGHT TO AT ANY TIME OBJECT TO THE PROCESSING OF YOUR PERSONAL DATA BASED ON GROUNDS ARISING FROM YOUR UNIQUE SITUATION. THIS ALSO APPLIES TO ANY PROFILING BASED ON THESE PROVISIONS. TO DETERMINE THE LEGAL BASIS, ON WHICH ANY PROCESSING OF DATA IS BASED, PLEASE CONSULT THIS DATA PROTECTION DECLARATION. IF YOU LOG AN OBJECTION, WE WILL NO LONGER PROCESS YOUR AFFECTED PERSONAL DATA, UNLESS WE ARE IN A POSITION TO PRESENT COMPELLING PROTECTION WORTHY GROUNDS FOR THE PROCESSING OF YOUR DATA, THAT OUTWEIGH YOUR INTERESTS, RIGHTS AND FREEDOMS OR IF THE PURPOSE OF THE PROCESSING IS THE CLAIMING, EXERCISING OR DEFENCE OF LEGAL ENTITLEMENTS (OBJECTION PURSUANT TO ART. 21(1) GDPR).

IF YOUR PERSONAL DATA IS BEING PROCESSED IN ORDER TO ENGAGE IN DIRECT ADVERTISING, YOU HAVE THE RIGHT TO OBJECT TO THE PROCESSING OF YOUR AFFECTED PERSONAL DATA FOR THE PURPOSES OF SUCH ADVERTISING AT ANY TIME. THIS ALSO APPLIES TO PROFILING TO THE EXTENT THAT IT IS AFFILIATED WITH SUCH DIRECT ADVERTISING. IF YOU OBJECT, YOUR PERSONAL DATA WILL SUBSEQUENTLY NO LONGER BE USED FOR DIRECT ADVERTISING PURPOSES (OBJECTION PURSUANT TO ART. 21(2) GDPR).

Right to log a complaint with the competent supervisory agency

In the event of violations of the GDPR, data subjects are entitled to log a complaint with a supervisory agency, in particular in the member state where they usually maintain their domicile, place of work or at the place where the alleged violation occurred. The right to log a complaint is in effect regardless of any other administrative or court proceedings available as legal recourses.

Right to data portability

You have the right to demand that we hand over any data we automatically process on the basis of your consent or in order to fulfil a contract be handed over to you or a third party in a commonly used, machine readable format. If you should demand the direct transfer of the data to another controller, this will be done only if it is technically feasible.

Information about, rectification and eradication of data

Within the scope of the applicable statutory provisions, you have the right to at any time demand information about your archived personal data, their source and recipients as well as the purpose of the processing of your data. You may also have a right to have your data rectified or eradicated. If you have questions about this subject matter or any other questions about personal data, please do not hesitate to contact us at any time.

Right to demand processing restrictions

You have the right to demand the imposition of restrictions as far as the processing of your personal data is concerned. To do so, you may contact us at any time. The right to demand restriction of processing applies in the following cases:

  • In the event that you should dispute the correctness of your data archived by us, we will usually need some time to verify this claim. During the time that this investigation is ongoing, you have the right to demand that we restrict the processing of your personal data.
  • If the processing of your personal data was/is conducted in an unlawful manner, you have the option to demand the restriction of the processing of your data in lieu of demanding the eradication of this data.
  • If we do not need your personal data any longer and you need it to exercise, defend or claim legal entitlements, you have the right to demand the restriction of the processing of your personal data instead of its eradication.
  • If you have raised an objection pursuant to Art. 21(1) GDPR, your rights and our rights will have to be weighed against each other. As long as it has not been determined whose interests prevail, you have the right to demand a restriction of the processing of your personal data.

If you have restricted the processing of your personal data, these data – with the exception of their archiving – may be processed only subject to your consent or to claim, exercise or defend legal entitlements or to protect the rights of other natural persons or legal entities or for important public interest reasons cited by the European Union or a member state of the EU.

SSL and/or TLS encryption

For security reasons and to protect the transmission of confidential content, such as purchase orders or inquiries you submit to us as the website operator, this website uses either an SSL or a TLS encryption program. You can recognize an encrypted connection by checking whether the address line of the browser switches from “http://” to “https://” and also by the appearance of the lock icon in the browser line.

If the SSL or TLS encryption is activated, data you transmit to us cannot be read by third parties.

4. Recording of data on this website

Cookies

Our websites and pages use what the industry refers to as “cookies.” Cookies are small data packages that do not cause any damage to your device. They are either stored temporarily for the duration of a session (session cookies) or they are permanently archived on your device (permanent cookies). Session cookies are automatically deleted once you terminate your visit. Permanent cookies remain archived on your device until you actively delete them, or they are automatically eradicated by your web browser.

Cookies can be issued by us (first-party cookies) or by third-party companies (so-called third-party cookies). Third-party cookies enable the integration of certain services of third-party companies into websites (e.g., cookies for handling payment services).

Cookies have a variety of functions. Many cookies are technically essential since certain website functions would not work in the absence of these cookies (e.g., the shopping cart function or the display of videos). Other cookies may be used to analyze user behavior or for promotional purposes.

Cookies, which are required for the performance of electronic communication transactions, for the provision of certain functions you want to use (e.g., for the shopping cart function) or those that are necessary for the optimization (required cookies) of the website (e.g., cookies that provide measurable insights into the web audience), shall be stored on the basis of Art. 6(1)(f) GDPR, unless a different legal basis is cited. The operator of the website has a legitimate interest in the storage of required cookies to ensure the technically error-free and optimized provision of the operator’s services. If your consent to the storage of the cookies and similar recognition technologies has been requested, the processing occurs exclusively on the basis of the consent obtained (Art. 6(1)(a) GDPR and § 25 (1) TTDSG); this consent may be revoked at any time.

You have the option to set up your browser in such a manner that you will be notified any time cookies are placed and to permit the acceptance of cookies only in specific cases. You may also exclude the acceptance of cookies in certain cases or in general or activate the delete-function for the automatic eradication of cookies when the browser closes. If cookies are deactivated, the functions of this website may be limited.

Which cookies and services are used on this website can be found in this privacy policy.

Server log files

The provider of this website and its pages automatically collects and stores information in so-called server log files, which your browser communicates to us automatically. The information comprises:

  • The type and version of browser used
  • The used operating system
  • Referrer URL
  • The hostname of the accessing computer
  • The time of the server inquiry
  • The IP address

This data is not merged with other data sources.

This data is recorded on the basis of Art. 6(1)(f) GDPR. The operator of the website has a legitimate interest in the technically error free depiction and the optimization of the operator’s website. In order to achieve this, server log files must be recorded.

Contact form

If you submit inquiries to us via our contact form, the information provided in the contact form as well as any contact information provided therein will be stored by us in order to handle your inquiry and in the event that we have further questions. We will not share this information without your consent.

The processing of these data is based on Art. 6(1)(b) GDPR, if your request is related to the execution of a contract or if it is necessary to carry out pre-contractual measures. In all other cases the processing is based on our legitimate interest in the effective processing of the requests addressed to us (Art. 6(1)(f) GDPR) or on your agreement (Art. 6(1)(a) GDPR) if this has been requested; the consent can be revoked at any time.

The information you have entered into the contact form shall remain with us until you ask us to eradicate the data, revoke your consent to the archiving of data or if the purpose for which the information is being archived no longer exists (e.g., after we have concluded our response to your inquiry). This shall be without prejudice to any mandatory legal provisions, in particular retention periods.

Request by e-mail, telephone, or fax

If you contact us by e-mail, telephone or fax, your request, including all resulting personal data (name, request) will be stored and processed by us for the purpose of processing your request. We do not pass these data on without your consent.

These data are processed on the basis of Art. 6(1)(b) GDPR if your inquiry is related to the fulfillment of a contract or is required for the performance of pre-contractual measures. In all other cases, the data are processed on the basis of our legitimate interest in the effective handling of inquiries submitted to us (Art. 6(1)(f) GDPR) or on the basis of your consent (Art. 6(1)(a) GDPR) if it has been obtained; the consent can be revoked at any time.

The data sent by you to us via contact requests remain with us until you request us to delete, revoke your consent to the storage or the purpose for the data storage lapses (e.g. after completion of your request). Mandatory statutory provisions – in particular statutory retention periods – remain unaffected.

5. Analysis tools and advertising

Google Analytics

This website uses functions of the web analysis service Google Analytics. The provider of this service is Google Ireland Limited (“Google”), Gordon House, Barrow Street, Dublin 4, Ireland.

Google Analytics enables the website operator to analyze the behavior patterns of website visitors. To that end, the website operator receives a variety of user data, such as pages accessed, time spent on the page, the utilized operating system and the user’s origin. This data is assigned to the respective end device of the user. An assignment to a user-ID does not take place.

Furthermore, Google Analytics allows us to record your mouse and scroll movements and clicks, among other things. Google Analytics uses various modeling approaches to augment the collected data sets and uses machine learning technologies in data analysis.

Google Analytics uses technologies that make the recognition of the user for the purpose of analyzing the user behavior patterns (e.g., cookies or device fingerprinting). The website use information recorded by Google is, as a rule transferred to a Google server in the United States, where it is stored.

The use of these services occurs on the basis of your consent pursuant to Art. 6(1)(a) GDPR and § 25(1) TTDSG. You may revoke your consent at any time.

Data transmission to the US is based on the Standard Contractual Clauses (SCC) of the European Commission. Details can be found here: https://privacy.google.com/businesses/controllerterms/mccs/.

IP anonymization

On this website, we have activated the IP anonymization function. As a result, your IP address will be abbreviated by Google within the member states of the European Union or in other states that have ratified the Convention on the European Economic Area prior to its transmission to the United States. The full IP address will be transmitted to one of Google’s servers in the United States and abbreviated there only in exceptional cases. On behalf of the operator of this website, Google shall use this information to analyze your use of this website to generate reports on website activities and to render other services to the operator of this website that are related to the use of the website and the Internet. The IP address transmitted in conjunction with Google Analytics from your browser shall not be merged with other data in Google’s possession.

Browser plug-in

You can prevent the recording and processing of your data by Google by downloading and installing the browser plugin available under the following link: https://tools.google.com/dlpage/gaoptout?hl=en.

For more information about the handling of user data by Google Analytics, please consult Google’s Data Privacy Declaration at: https://support.google.com/analytics/answer/6004245?hl=en.

Contract data processing

We have executed a contract data processing agreement with Google and are implementing the stringent provisions of the German data protection agencies to the fullest when using Google Analytics.

6. Plug-ins and Tools

Google Fonts (local embedding)

This website uses so-called Google Fonts provided by Google to ensure the uniform use of fonts on this site. These Google fonts are locally installed so that a connection to Google’s servers will not be established in conjunction with this application.

For more information on Google Fonts, please follow this link: https://developers.google.com/fonts/faq and consult Google’s Data Privacy Declaration under: https://policies.google.com/privacy?hl=en.

Google Maps

This website uses the mapping service Google Maps. The provider is Google Ireland Limited (“Google”), Gordon House, Barrow Street, Dublin 4, Ireland.

To enable the use of the Google Maps features, your IP address must be stored. As a rule, this information is transferred to one of Google’s servers in the United States, where it is archived. The operator of this website has no control over the data transfer. In case Google Maps has been activated, Google has the option to use Google Fonts for the purpose of the uniform depiction of fonts. When you access Google Maps, your browser will load the required web fonts into your browser cache, to correctly display text and fonts.

We use Google Maps to present our online content in an appealing manner and to make the locations disclosed on our website easy to find. This constitutes a legitimate interest as defined in Art. 6(1)(f) GDPR. If appropriate consent has been obtained, the processing is carried out exclusively on the basis of Art. 6(1)(a) GDPR and § 25 (1) TTDSG, insofar the consent includes the storage of cookies or the access to information in the user’s end device (e.g., device fingerprinting) within the meaning of the TTDSG. This consent can be revoked at any time.

Data transmission to the US is based on the Standard Contractual Clauses (SCC) of the European Commission. Details can be found here: https://privacy.google.com/businesses/gdprcontrollerterms/ and https://privacy.google.com/businesses/gdprcontrollerterms/sccs/.

For more information on the handling of user data, please review Google’s Data Privacy Declaration under: https://policies.google.com/privacy?hl=en.

Wordfence

We have included Wordfence on this website. The provider is Defiant Inc, Defiant, Inc, 800 5th Ave Ste 4100, Seattle, WA 98104, USA (hereinafter “Wordfence”).

Wordfence is designed to protect our website from unwanted access or malicious cyberattacks. To accomplish this, our website establishes a permanent connection with Wordfence’s servers, which check and block their databases against access to our website.

The use of Wordfence is based on Art. 6(1)(f) GDPR. The website operator has a legitimate interest in the most effective protection of his website against cyberattacks. If appropriate consent has been obtained, the processing is carried out exclusively on the basis of Art. 6(1)(a) GDPR and § 25 (1) TTDSG, insofar the consent includes the storage of cookies or the access to information in the user’s end device (e.g., device fingerprinting) within the meaning of the TTDSG. This consent can be revoked at any time.

Data transmission to the USA is based on the standard contractual clauses of the EU Commission. Details can be found here: https://www.wordfence.com/help/general-data-protection-regulation/.

Data processing

We have concluded a data processing agreement (DPA) for the use of the above-mentioned service. This is a contract mandated by data privacy laws that guarantees that they process personal data of our website visitors only based on our instructions and in compliance with the GDPR.

7. eCommerce and payment service providers

Processing of Customer and Contract Data

We collect, process, and use personal customer and contract data for the establishment, content arrangement and modification of our contractual relationships. Data with personal references to the use of this website (usage data) will be collected, processed, and used only if this is necessary to enable the user to use our services or required for billing purposes. The legal basis for these processes is Art. 6(1)(b) GDPR.

The collected customer data shall be deleted upon completion of the order or termination of the business relationship and upon expiration of any existing statutory archiving periods. This shall be without prejudice to any statutory archiving periods.

8. Custom Services

Handling applicant data

We offer website visitors the opportunity to submit job applications to us (e.g., via e-mail, via postal services on by submitting the online job application form). Below, we will brief you on the scope, purpose and use of the personal data collected from you in conjunction with the application process. We assure you that the collection, processing, and use of your data will occur in compliance with the applicable data privacy rights and all other statutory provisions and that your data will always be treated as strictly confidential.

Scope and purpose of the collection of data

If you submit a job application to us, we will process any affiliated personal data (e.g., contact and communications data, application documents, notes taken during job interviews, etc.), if they are required to make a decision concerning the establishment or an employment relationship. The legal grounds for the aforementioned are § 26 BDSG according to German Law (Negotiation of an Employment Relationship), Art. 6(1)(b) GDPR (General Contract Negotiations) and – provided you have given us your consent – Art. 6(1)(a) GDPR. You may revoke any consent given at any time. Within our company, your personal data will only be shared with individuals who are involved in the processing of your job application.

If your job application should result in your recruitment, the data you have submitted will be archived on the grounds of § 26 BDSG and Art. 6(1)(b) GDPR for the purpose of implementing the employment relationship in our data processing system.

Data Archiving Period

If we are unable to make you a job offer or you reject a job offer or withdraw your application, we reserve the right to retain the data you have submitted on the basis of our legitimate interests (Art. 6(1)(f) GDPR) for up to 6 months from the end of the application procedure (rejection or withdrawal of the application). Afterwards the data will be deleted, and the physical application documents will be destroyed. The storage serves in particular as evidence in the event of a legal dispute. If it is evident that the data will be required after the expiry of the 6-month period (e.g., due to an impending or pending legal dispute), deletion will only take place when the purpose for further storage no longer applies.

Longer storage may also take place if you have given your agreement (Article 6(1)(a) GDPR) or if statutory data retention requirements preclude the deletion.

Admission to the applicant pool

If we do not make you a job offer, you may be able to join our applicant pool. In case of admission, all documents and information from the application will be transferred to the applicant pool in order to contact you in case of suitable vacancies.

Admission to the applicant pool is based exclusively on your express agreement (Art. 6(1)(a) GDPR). The submission agreement is voluntary and has no relation to the ongoing application procedure. The affected person can revoke his agreement at any time. In this case, the data from the applicant pool will be irrevocably deleted, provided there are no legal reasons for storage.

The data from the applicant pool will be irrevocably deleted no later than two years after consent has been granted.

Gebze-Kocaeli (Turecko)

LINDE Opsan Otomotiv Parça San. ve Tic.A.Ş.
Makine İhtisas Organize Sanayi Bölgesi Mah 4. Cadde N:13, D:2
41455 Dilovası/Kocaeli, Turecko
+90 262 724 87 39

Jeďte asi 25 minut do Kocaeli po dálnici R80 a potom sjeďte na exitu O7 Kuzey Marmara Otoyolu. Poté sjeďte na exitu Dilovasi Organize Sanayi Bölgesi vpravo. Pokračujte po silnici až k průmyslové zóně Makine Ihtisas OSB, kde se nachází závod. Na první křižovatce odbočte vpravo a pokračujte po 4. Cadde. Závod se nachází na levé straně na konci ulice.

Technologie

Stamping

Roll-Forming

Joining

Oblast výroby

11630m²

Výroba následujících komponentů:

  • Battery support
  • Seat guides
  • Front bumper beams

East London (RSA)

LINDE + WIEMANN RSA (Pty) Ltd.
Plant CE1 Mdubu Road – ZA
East London 5201
+27 43 050 4000

LINDE AND WIEMANN RSA (Pty) Ltd.
Building BW3 Ikhala Rd West – ZA
East London 5201

Při příjezdu z letiště East London odbočte vlevo na Settlers Way. Pokračujte po Setllers Way a odbočte vpravo na Chester Road. Po Chester Road dojeďte ke vjezdu do IDZ. Zde se zaregistrujte u bezpečnostního kontrolora a poté projeďte bezpečnostním vchodem. Na kruhovém objezdu sjeďte druhým výjezdem na Ikhala Road. Poté odbočte vlevo na Madubu Road, zde se nachází CE1 (zpracování kovů) nebo BE4 pro dodávky. Nebo pokračujte rovně po Ikhala Road a poté odbočte vlevo na Ikhala Road West, zde se nachází BW3 (závod).

 

Port Elizabeth (RSA)

LINDE AND WIEMANN RSA (Pty) Ltd.
Unit 8B, Brookes on the Bay – ZA
Port Elizabeth 6013
+27 41 408 6011

Při příjezdu z letiště Port Elizabeth jeďte po Allister Miller Driver. Přejeďte ulici Forest Hill a vjeďte na ulici La Roche Drive. Na světelné křižovatce odbočte vpravo na Beach Road. Odbočte vpravo na Brookes Hill Drive a pak vlevo do Brookes Hill Suites.

Technologie

Roll-Forming

Joining

Výrobní oblast

11.500m²

Výroba následujících komponentů:

  • Sills
  • Side panels
  • Rear end trim parts

Lavonia (USA)

LINDE + WIEMANN US Inc.
1720 Knox Bridge Crossing Rd
30553, Lavonia / GA – US
+1 706 460 5900

Při příjezdu z South Atlanta po dálnici I-85 sjeďte na exitu 177 a na konci výjezdu odbočte vpravo. U cedule Stop odbočte vlevo. Závod se nachází na levé straně. Při příjezdu z North Greenville po dálnici I-85 sjeďte na exitu 177 a na konci výjezdu odbočte vlevo. U cedule Stop odbočte vlevo. Závod se nachází na levé straně.

Technologie

Joining

Výrobní oblast

4.100m²

Výroba následujících komponentů:

  • Cockpit module cross beams
  • Dome struts
  • Car body reinforcements

Kecskemet – Maďarsko

LINDE + WIEMANN Montagetechnik Kft
Matkói út 101
HU-6000 Kecskemét
+36 30 230 6653

Při příjezdu z Budapešti jeďte po dálnici M5 a sjeďte na exitu 91. Držte se vpravo a sledujte značení na silnici 54 směrem na Kecskemét. Na druhém kruhovém objezdu sjeďte třetím výjezdem a pokračujte po silnici až ke světelné křižovatce. Na křižovatce odbočte vpravo a pokračujte po silnici až na druhou křižovatku. Zde odbočte vlevo. Jeďte po této silnici až na konec. Závod se nachází po pravé straně.

Technologie

Roll-Forming

Joining

Výrobní oblast

5.500m²

Výroba následujících komponentů:

  • Sills
  • Frame components
  • Door reinforcements

 

Tianjin (Čína)

Baokang Ave, Baodi District
Tianjin, China, 301816
+86 22-4184445

Při příjezdu z města Tchien-ťin jeďte po rychlostní silnici S1 k mýtné stanici Baodi. Zde sjeďte z dálnice a pokračujte po západním vnějším okruhu ke křižovatce s ulicí Tangtong. Odbočte vlevo, pokračujte ulicí jeden blok a pak odbočte vpravo. Pokračujte ulicí jeden blok a pak odbočte vlevo. Jeďte rovně až na konec ulice. Závod se nachází po levé straně.

Technologie

Stamping

Roll-Forming

Joining

Oblast výroby

40.000m²

Výroba následujících komponentů:

  • Sills
  • Door & window beams
  • A-Pillars

Chongqing (Čína)

Jing He Street, No. 888,
Gongzhuling EDZ
+86 A29434-8890900

Při příjezdu z města Changchun jeďte rovně po silnici Qiche ke křižovatce s ulicí Binhe. Zde odbočte vpravo a pokračujte ulicí jeden blok. Pak odbočte vlevo na silnici Jinghe a jeďte rovně 800 metrů. Závod se nachází po pravé straně.

Technologie

Roll-Forming

Joining

Oblast výroby

4.000m²

Výroba následujících komponentů:

  • A-Pillars
  • Door impact struts
  • Cross beams

Changchun (Čína)

Jing He Street, No. 888,
Gongzhuling EDZ
+86 A29434-8890900

Při příjezdu z města Changchun jeďte rovně po silnici Qiche ke křižovatce s ulicí Binhe. Zde odbočte vpravo a pokračujte ulicí jeden blok. Pak odbočte vlevo na silnici Jinghe a jeďte rovně 800 metrů. Závod se nachází po pravé straně.

Technologie

Roll-Forming

Joining

Oblast výroby

30.000m²

Výroba následujících komponentů:

  • Module cross beams
  • Sills
  • Front bumper beams

Zaragoza

LINDE + WIEMANN Zaragoza, S.L.U.
C. Aneto, 11
50690 Pedrola, Zaragoza
+34 976 654 724

Při příjezdu z letiště v Barceloně jeďte 10 km po silnici C-32. Pokračujte po silnici AP-7 a pak AP-2. Pokračujte po silnici AP-2 322 km a poté sjeďte na exitu 265 na A-68. Pokračujte po silnici A-122 a odbočte na ulici Aneto. Pokračujte po této ulici, dokud neuvidíte závod.

Technologie

Roll-Forming

Joining

Oblast výroby

7.200m²

Výroba následujících komponentů:

  • Car wheel arches
  • Sills
  • Car body reinforcements

 

Esparreguera

LINDE + WIEMANN Esparreguera, S.L.U.
Calle Argila, Naves 7-12 (Polígono industrial Magarola Sud)
08292 – Esparreguera (Barcelona) | SPAIN
+34 937708444

Při příjezdu z letiště v Barceloně sjeďte na exitu 196AB směrem na Gironu/Lleidu. Pokračujte po dálnici A-2, pak sjeďte na exitu 582BB-23. Jeďte 1 km po ulici Ceramica, dokud neuvidíte závod.

Technologie

Roll-Forming

Joining

Oblast výroby

3.000m²

Výroba následujících komponentů:

  • Rear end trim parts
  • Sills
  • Door guiding beams

La Garriga

LINDE + WIEMANN, S.A.
Carrer del Mil·lenari de Catalunya 34
08530 La Garriga
+34 93 871 8000

Při příjezdu z letiště v Barceloně sjeďte na exitu 196AB směrem na Gironu/Lleidu. Pokračujte po silnici A-2, pak B-23 a jeďte po silnici AP-7. Po 20 km sjeďte na exitu 14 na silnici C-17. Po 14 km sjeďte na exitu BP-1432 – La Garriga. Pokračujte po ulici Av. Generalitat asi 1 km, dokud neuvidíte závod.

Technologie

Stamping

Joining

Oblast výroby

12.200m²

Výroba následujících komponentů:

  • Frame components
  • A-Pillars
  • Car body reinforcements

Benátky

LINDE + WIEMANN CZ s.r.o.
Pražská 707
294 71 Benátky nad Jizerou
+420 730 845 109

Při příjezdu z Prahy jeďte po dálnici D10 a poté sjeďte na exitu 27. Na konci výjezdu odbočte vlevo. Na kruhovém objezdu jeďte rovně a silnici opusťte třetí ulicí vlevo. Pokračujte po silnici téměř až na konec města, dokud neuvidíte po levé straně ceduli „MTC areál“. Závod se nachází v poslední hale tohoto areálu.

Technologie

Roll-Forming

Joining

Oblast výroby

7.500m²

Výroba následujících komponentů:

  • Roof frame
  • Window beams
  • A-Pillars

 

Lysá

LINDE + WIEMANN CZ s.r.o.
3, U Dráhy 1356
289 22 Lysá nad Labem
+420 325 560 706

Při příjezdu z Prahy jeďte po dálnici D11 a poté sjeďte na exitu 18. Na konci exitu odbočte vpravo směrem na Lysou n. L. (silnice 272). Po této silnici jeďte až do Lysé n. L. Za cedulí města odbočte na křižovatce vlevo a pokračujte po hlavní silnici. Po přejetí železniční trati odbočte u supermarketu doprava. Pokračujte po silnici až k další křižovatce. Odbočte vlevo a pokračujte po silnici, dokud neuvidíte závod.

Technologie

Stamping

Joining

Oblast výroby

14.000m²

Výroba následujících komponentů:

  • Roof frame
  • Small pressed parts
  • Replacement parts

Břeclav

LINDE + WIEMANN CZ s.r.o.
Lidická 141
690 03 Břeclav
+420 519 440 620

Při příjezdu z Brna jeďte po dálnici D2 směrem na Bratislavu. Poté sjeďte na exitu 48 a na křižovatce odbočte vlevo na Břeclav. Jeďte rovně přes kruhový objezd a pokračujte po silnici, dokud neuvidíte závod (hned za nákupním centrem).

Technologie

Roll-Forming

Joining

Oblast výroby

12.000m²

Výroba následujících komponentů:

  • Cockpit module cross beams
  • Battery boxes
  • Door reinforcements

Brémy

LINDE + WIEMANN Deutschland SE
Bergener Str. 4
28307 Bremen
+49 421 3770860

Při příjezdu od Osnabrücku po dálnici A1 sjeďte na exitu 55 Bremen-Hemelingen směrem na Hansalinie a poté odbočte vlevo na ulici Europaallee. Po 900 metrech odbočte vpravo na ulici Bergener Straße, po 500 metrech je cíl vlevo.

Při příjezdu od Bremerhavenu/Hannoveru po dálnici A27 a od Hamburku po dálnici A1 sjeďte z dálnice na exitu 55 Bremen-Hemelingen směrem na Bremen Centrum, pak se držte vlevo a jeďte rovně k dálničnímu přivaděči Hemelingen. Sjeďte na výjezdu směrem na Hansalinie/Autohof, poté odbočte vpravo na dálniční přivaděč Hemelingen. Odbočte vlevo na ulici Europaallee, po 900 metrech odbočte vpravo na ulici Bergener Straße a po 500 metrech se cíl cesty nachází vlevo.

Technologie

Roll-Forming

Joining

Oblast výroby

18.500m²

Výroba následujících komponentů:

  • Sills
  • Side panels
  • Rear end trim parts

Elstra

LINDE + WIEMANN Deutschland SE
Am Sandberg 9
01920 Elstra
+49 35793 84 0

Při příjezdu od Budyšína/Görlitzu nebo Drážďan sjeďte z dálnice A4 na exitu 87 Burkau.
Pak jeďte po silnici S 94, K9239 a pokračujte po silnici Bischofswerdaer Landstraße až do Elstra-Rauschwitz.
Poté odbočte vpravo na ulici „Am Sandberg“, závod (hlavní vchod/sekretariát) se nachází na konci ulice po pravé straně.

Technologie

Elsta I

Stamping

Joining

Elsta II

Hot-Forming

Oblast výroby

ELsta I
16.900m²

ELsta II
13.500m²

Výroba následujících komponentů:

Elsta I

  • Sill reinforcements
  • Rear end trim parts
  • Frame components

Elsta II

  • A-Pillars
  • Front cross beams
  • Reinforcement panels

Hagenbach

LINDE + WIEMANN Deutschland SE
Faureciastraße 4
76767 Hagenbach
+49 7273 8003 11

Při příjezdu z dálnice A65/B10/B09 sjeďte na Wörther Kreuz ve směru na Hagenbach. Pokračujte po silnici Habsburger Straße/L540 ke kruhovému objezdu. Z kruhového výjezdu sjeďte třetím výjezdem a jeďte po silnici Rheinstraße/L556 směrem na Neuburg. Z kruhového výjezdu sjeďte prvním výjezdem. Odbočte vlevo na ulici Faureciastraße. Na konci ulice se nachází závod.

Technologie

Roll-Forming

Joining

Oblast výroby

17.000m²

Výroba následujících komponentů:

  • Sills
  • Frame components
  • Side panels

Ingolstadt

LINDE + WIEMANN Deutschland SE
Akeleistraße 11
85055 Ingolstadt
+49 841 90155 0

Na dálnici A9 ve směru od Norimberk sjeďte na exitu Ingolstadt Vohburg. Na prvním výjezdu odbočte vpravo. Vzápětí odbočte vlevo přes malý most. Za mostem odbočte vpravo. Závod se nachází na levé straně. Na dálnici A9 ve směru od Norimberku sjeďte na exitu Ingolstadt Nord. Na světelné křižovatce odbočte vlevo. Na druhé světelné křižovatce odbočte opět vlevo. Pokračujte po silnici a na prvním výjezdu odbočte vpravo. Vzápětí odbočte vlevo přes malý most. Za mostem odbočte vpravo. Závod se nachází na levé straně.

Technologie

Stamping

Roll-Forming

Joining

Oblast výroby

14.800m²

Výroba následujících komponentů:

  • Sills
  • Cross beams
  • Dome struts

Dillenburg

LINDE + WIEMANN Deutschland SE
Werk Dillenburg – Industriestraße 4-12
35683 Dillenburg
+49 2771 392-0

LINDE + WIEMANN SE & CO. KG
Postfach 15 54
35665 Dillenburg

Na dálnici A45 sjeďte na exitu 25 Dillenburg, poté odbočte z dálnice B277 vpravo na dálnici B253 směrem na Frankenberg/Biedenkopf a na velké světelné křižovatce odbočte dvakrát doprava na ulici Industriestraße.

Technologie

Stamping

Roll-Forming

Joining

Hot-Forming

Oblast výroby

17.900m²

Výroba následujících komponentů:

  • Door impact struts
  • Cross member tubes
  • Reinforcement plates

Gebze-Kocaeli (Turkey)

LINDE Opsan Otomotiv Parça San. ve Tic.A.Ş.
Makine İhtisas Organize Sanayi Bölgesi Mah 4. Cadde N:13, D:2
41455 Dilovası/Kocaeli, Turkey
+90 262 724 87 39

Take R80 Highway road to Kocaeli. Follow the road approximately 25 mins and take the O7 Kuzey Marmara Otoyolu exit. Then take Dilovasi Organize Sanayi Bölgesi exit on the right. Follow the road to Makine Ihtisas OSB – Industrial Area in which the plant is located. Take the first right and follow the 4. Cadde. You can see the plant at the end of the road on the left.

Technologies

Stamping

Roll-Forming

Joining

Production area

11630m²

Production of the following components:

  • Battery support
  • Seat guides
  • Front bumper beams

East London (South Africa)

LINDE + WIEMANN RSA (Pty) Ltd.
Plant CE1 Mdubu Road – ZA
East London 5201
+27 43 050 4000

LINDE AND WIEMANN RSA (Pty) Ltd.
Building BW3 Ikhala Rd West – ZA
East London 5201

From the East London Airport, turn left onto Settlers Way. Head along Settlers Way and turn right into Chester Road. Continue on Chester Road to the entrance of the IDZ. Sign in at Security and pass the Security Entrance. At the roundabout, take the 2nd exit into Ikhala Road. Take the 3rd left into Madubu Road to access CE1 (Metal Treatment) or BE4 for deliveries or continue straight on Ikhala Road and take a left onto Ikhala Road West to access BW3 (Assembly Plant).

 

Port Elizabeth (South Africa)

LINDE AND WIEMANN RSA (Pty) Ltd.
Unit 8B, Brookes on the Bay – ZA
Port Elizabeth 6013
+27 41 408 6011

From the Port Elizabeth Airport, follow Allister Miller Drive. Cross Forest Hill Road into La Roche Drive. At the traffic light, turn right into Beach Road. Turn right into Brookes Hill Drive and then left onto Brookes Hill Suites.

Technologies

Roll-Forming

Joining

Production area

11.500m²

Production of the following components:

  • Sills
  • Side panels
  • Rear end trim parts

Lavonia (USA)

LINDE + WIEMANN US Inc.
1720 Knox Bridge Crossing Rd
30553, Lavonia / GA – US
+1 706 460 5900

Coming from Atlanta take exit 177
on I-85 South, turn right, at the 4 way stop sign turn left – plant is visible on the left hand side; coming from Greenville take exit 177 on I-85 North, turn left, at the 4 way stop sign turn left – plant is visible on the left hand side.

Technologies

Joining

Production area

4.100m²

Production of the following components:

  • Cockpit module cross beams
  • Dome struts
  • Car body reinforcements

Kecskemet (Ungarn)

LINDE + WIEMANN Montagetechnik Kft
Matkói út 101
HU-6000 Kecskemét
+36 30 230 6653

Coming from Budapest, take highway M5. Then take exit 91 and stay on the right side following the signs to road 54, direction Kecskemét. At the second roundabout take the third exit and follow the street until you reach the traffic light. At the junction turn right and then take the second street on the left side. Follow the road until the end. The plant will be visible on the right side.

Technologies

Roll-Forming

Joining

Production area

5.500m²

Production of the following components:

  • Sills
  • Frame components
  • Door reinforcements

 

Tianjin (China)

Baokang Ave, Baodi District
Tianjin, China, 301816
+86 22-4184445

Coming from Tianjin city take expressway S1 until Baodi toll station, take the exit and follow along West outer ring Road until the junction with Tangtong street. Turn left and follow the road for one block. Turn right and follow the road again for one block. Then turn left and follow the road until the end of the street. The plant is visible on the left hand side.

Technologies

Stamping

Roll-Forming

Joining

Production area

40.000m²

Production of the following components:

  • Sills
  • Door & window beams
  • A-Pillars

Chongqing (China)

Jing He Street, No. 888,
Gongzhuling EDZ
+86 A29434-8890900

Coming from Changchun city along Qiche Road go straight until the junction with Binhe Street, turn right and keep going for one block. Turn left to Jinghe Road and go straight for 800 meters. The plant is visible on the right hand side.

Technologies

Roll-Forming

Joining

Production area

4.000m²

Production of the following components:

  • A-Pillars
  • Door impact struts
  • Cross beams

Changchun (China)

Jing He Street, No. 888,
Gongzhuling EDZ
+86 A29434-8890900

Coming from Changchun city along Qiche Road go straight until the junction with Binhe Street, turn right and keep going for one block. Turn left to Jinghe Road and go straight for 800 meters. The plant is visible on the right hand side.

Technologies

Roll-Forming

Joining

Production area

30.000m²

Production of the following components:

  • Module cross beams
  • Sills
  • Front bumper beams

Zaragoza

LINDE + WIEMANN Zaragoza, S.L.U.
C. Aneto, 11
50690 Pedrola, Zaragoza
+34 976 654 724

Coming from Barcelona Airport take C-32, after 10
km take AP-7, and after take AP-2. Conitnue 311 km and take exit 265 to A-68. Continue on A-122 and take Aneto Street, and after 1 km you will be in Linde + Wiemann Zaragoza.

Technologies

Roll-Forming

Joining

Production area

7.200m²

Production of the following components:

  • Car wheel arches
  • Sills
  • Car body reinforcements

 

Esparreguera

LINDE + WIEMANN Esparreguera, S.L.U.
Calle Argila, Naves 7-12 (Polígono industrial Magarola Sud)
08292 – Esparreguera (Barcelona) | SPAIN
+34 937708444

Coming from Barcelona Airport take exit 196AB
direction Girona/Lleida. Continue on A-2. Take exit 582B. Take Ceramica Street for 1 km and you will arrive to Linde + Wiemann Esparraguera.

Technologies

Roll-Forming

Joining

Production area

3.000m²

Production of the following components:

  • Rear end trim parts
  • Sills
  • Door guiding beams

La Garriga

LINDE + WIEMANN, S.A.
Carrer del Mil·lenari de Catalunya 34
08530 La Garriga
+34 93 871 8000

Coming from Barcelona Airport take exit 196AB
direction Girona/Lleida. Continue on A-2, take B-23 and after take interstate AP-7. After 20 km take exit 14 to C-17. After 14km take exit BP-1432 – La Garriga. After 1 km on Av. Generalitat you will be able to see Linde + Wiemann La Garriga.

Technologies

Stamping

Joining

Production area

12.200m²

Production of the following components:

  • Frame components
  • A-Pillars
  • Car body reinforcements

Benatky

LINDE + WIEMANN CZ s.r.o.
Pražská 707
294 71 Benátky nad Jizerou
+420 730 845 109

Coming from Prague, follow highway D10 and take exit 27. At the end of the exit, turn left. After passing roundabout straight ahead, take 3rd street on the left. Almost at the end of the city, you will see on the left side “MTC areal” sign. The plant is the last hall in the area.

Technologies

Roll-Forming

Joining

Production area

7.500m²

Production of the following components:

  • Roof frame
  • Window beams
  • A-Pillars

 

Lysa

LINDE + WIEMANN CZ s.r.o.
3, U Dráhy 1356
289 22 Lysá nad Labem
+420 325 560 706

Coming from Prague, follow highway D11 and take exit 18. Turn right after the exit to Lysá n.L. (road 272). Follow the street until you arrived in Lysá n.L., right after the city, turn left at junction & then follow the main road. After passing the railway tracks, you will reach a supermarket. Turn right around the supermarket. Follow the street until you reach the next junction. Turn left and follow the road until you reach the plant.

Technologies

Stamping

Joining

Production area

14.000m²

Production of the following components:

  • Roof frame
  • Small pressed parts
  • Replacement parts

Breclav

LINDE + WIEMANN CZ s.r.o.
Lidická 141
690 03 Břeclav
+420 519 440 620

Coming from Brno, take highway number D2
direction Bratislava. Take the exit 48 and turn left at the junction, direction Břeclav. Pass the roundabout straight ahead and you will see the plant on the right side just behind the shopping mall.

Technologies

Roll-Forming

Joining

Production area

12.000m²

Production of the following components:

  • Cockpit module cross beams
  • Battery boxes
  • Door reinforcements

Bremen

LINDE + WIEMANN Deutschland SE
Bergener Str. 4
28307 Bremen
+49 421 3770860

Coming from Osnabrück via A1, take exit 55
Bremen-Hemelingen direction Hansalinie, then turn left on Europaallee. After 900 m turn right on Bergener Straße. Gollow the street for 500 meter, the plant will be on the left side.

Coming from Bremerhaven/Hannover via A27 and coming from Hamburg via A1, take exit 55 Bremen-Hemelingen, direction Bremen Centrum. Kkeep left and follow the feeder road straight ahead direction Hemelingen. Take the highway ramp direction Hansalinie/Autohof and turn into feeder road Hemelingen. Turn left on Europaallee, follow the street, after 900 meters turn right on Bergener Straße; follow the road for 500 meters, the plant will be on the left side.

Technologies

Roll-Forming

Joining

Production area

18.500m²

Production of the following components:

  • Sills
  • Side panels
  • Rear end trim parts

Elstra

LINDE + WIEMANN Deutschland SE
Am Sandberg 9
01920 Elstra
+49 35793 84 0

Coming from Bautzen/Görlitz or Dresden, follow A4 and take exit 87 Burkau. Follow S 94, K9239 Bischofswerdaer Landstraße until Elstra-Rauschwitz. Turn right at Am Sandberg. The plant is on the right hand side at the end of the road.

Technologies

Elsta I

Stamping

Joining

Elsta II

Hot-Forming

Production area

ELsta I
16.900m²

ELsta II
13.500m²

Production of the following components:

Elsta I

  • Sill reinforcements
  • Rear end trim parts
  • Frame components

Elsta II

  • A-Pillars
  • Front cross beams
  • Reinforcement panels

Hagenbach

LINDE + WIEMANN Deutschland SE
Faureciastraße 4
76767 Hagenbach
+49 7273 8003 11

Coming from A65/B10/B09, take exit Wörther Kreuz direction Hagenbach. Follow Habsburger Straße / L540 until the roundabout. Take third exit in the roundabout and follow Rheinstraße / L556 direction Neuburg until you reach another roundabout. Take first exit in the roundabout and then turn left on Faurecia street. Follow the street until the plant is visible.

Technologies

Roll-Forming

Joining

Production area

17.000m²

Production of the following components:

  • Sills
  • Frame components
  • Side panels

Ingolstadt

LINDE + WIEMANN Deutschland SE
Akeleistraße 11
85055 Ingolstadt
+49 841 90155 0

Coming from Nuremberg on the A9, take the Ingolstadt Vohburg exit. Turn right at the first exit and shortly after turn left over the small bridge. After the bridge turn right. The plant is visible on the left hand side. Coming from Nuremberg on the A9, take the Ingolstadt Nord exit. Turn left at the traffic light, followed by left again at the second traffic light. Turn right at the first exit and shortly after turn left over the small bridge. After the bridge turn right. The plant is visible on the left hand side.

Technologies

Stamping

Roll-Forming

Joining

Production area

14.800m²

Production of the following components:

  • Sills
  • Cross beams
  • Dome struts

Dillenburg

LINDE + WIEMANN Deutschland SE
Werk Dillenburg – Industriestraße 4-12
35683 Dillenburg
+49 2771 392-0

LINDE + WIEMANN SE & CO. KG
Postfach 15 54
35665 Dillenburg

On interstate A45 take exit 25 Dillenburg. Follow
B277 until you can turn right on B253 direction Frankenberg/Biedenkopf. Follow the road until the big lights and turn immediately right twice on Industriestraße. You will then see the plant.

Technologies

Stamping

Roll-Forming

Joining

Hot-Forming

Production area

17.900m²

Production of the following components:

  • Door impact struts
  • Cross member tubes
  • Reinforcement plates

Standort Chongqing (China)

Jing He Street, No. 888,
Gongzhuling EDZ
+86 A29434-8890900

Von der Stadt Changchun kommend, geradeaus auf der Qiche Road bizszur Kreuzung Binhe Street fahren. Hier rechts abbiegen und der Straße für einen Block folgen. Dann links auf Jinghe Road abbiegen und 800 Meter geradeaus fahren. Das Werk ist auf rechten Seite sichtbar.

Technologien

Roll-Forming

Joining

Produktionsfläche

4.000m²

Produktion der folgenden Komponenten:

  • A-Säulen
  • Türaufprallstreben
  • Querträger

Standort Gebze-Kocaeli (Türkei)

LINDE Opsan Otomotiv Parça San. ve Tic.A.Ş.
Makine İhtisas Organize Sanayi Bölgesi Mah 4. Cadde N:13, D:2
41455 Dilovası/Kocaeli, Türkei
+90 262 724 87 39

R80 Highway nach Kocaeli für circa 25 Minuten folgen und dann O7 Kuzey Marmara Otoyolu Ausfahrt nehmen. Danach Dilovasi Organize Sanayi Bölgesi Ausfahrt rechts nehmen. Der Straße bis zu Makine Ihtisas OSB – Industrial Area folgende, in welcher sich das Werk befindet. Die erste Kreuzung rechts abbiegen und 4. Cadde folgen. Das Werk befindet sich auf der linken Seite am Ende der Straße.

Technologien

Stamping

Roll-Forming

Joining

Produktionsfläche

11630m²

Produktion der folgenden Komponenten:

  • Batteriehalterung
  • Sitzschienen
  • Stoßfängerträger

 

Standort Changchun (China)

Jing He Street, No. 888,
Gongzhuling EDZ
+86 A29434-8890900

Von der Stadt Changchun kommend, geradeaus auf der Qiche Road bis zur Kreuzung Binhe Street fahren. Hier rechts abbiegen und der Straße für einen Block folgen. Dann links auf Jinghe Road abbiegen und 800 Meter geradeaus fahren. Das Werk ist auf rechten Seite sichtbar.

Technologien

Roll-Forming

Joining

Produktionsfläche

30.000m²

Produktion der folgenden Komponenten:

  • Modulquerträger
  • Schweller
  • Stoßfängerträger

Standort Tianjin (China)

Baokang Ave, Baodi District
Tianjin, China, 301816
+86 22-4184445

Von der Stadt Tianjin kommend, Expressway S1 bis zur Mautstelle Baodi folgen. Hier vom Expressway abfahren und der West Outer Ring Road bis zur Kreuzung Tangtong Street folgen. Links abbiegen, der Straße einen Block lang folgen, dann rechts abbiegen. Der Straße erneut für einen Block folgen und dann links abbiegen. Geradeaus bis zum Ende der Straße fahren. Das Werk ist sichtbar auf der linken Seite.

Technologien

Stamping

Roll-Forming

Joining

Produktionsfläche

40.000m²

Produktion der folgenden Komponenten:

  • Schweller
  • Tür- und Fensterrahmen
  • A-Säulen

 

Standort East London (Südafrika)

LINDE + WIEMANN RSA (Pty) Ltd.
Plant CE1 Mdubu Road – ZA
East London 5201
+27 43 050 4000

LINDE AND WIEMANN RSA (Pty) Ltd.
Building BW3 Ikhala Rd West – ZA
East London 5201

Vom East London Flughafen kommend, links auf Settlers Way abbiegen. Settlers Way folgen und rechts auf Chester Road abbiegen. Chester Road bis zum Eingang des IDZ folgen. Hier bei der Sicherheitskontrolle anmelden und dann den Sicherheitseingang passieren. Im Kreisverkehr zweite Ausfahrt auf Ikhala Road nehmen. Dann links auf Madubu Road abbiegen um CE1 (Metal Treatment) oder BE4 für Anlieferungen zu gelangen. Oder weiter auf Ikhala Road geradeaus fahren und dann links auf Ikhala Road West abbiegen, um zu BW3 (Werk) zu gelangen.

 

Standort Port Elizabeth (Südafrika)

LINDE AND WIEMANN RSA (Pty) Ltd.
Unit 8B, Brookes on the Bay – ZA
Port Elizabeth 6013
+27 41 408 6011

Vom Port Elizabeth Flughafen kommend, Allister Miller Driver folgen. Forest Hill Road kreuzen um auf La Roche Drive zu gelangen. An der Ampel rechts in Beach Road abbiegen. Rechts in Brookes Hill Drive abbiegen und danach links in Brookes Hill Suites.

Technologien:

Roll-Forming

Joining

Produktionsfläche

11.500m²

Produktion der folgenden Komponenten:

  • Schweller
  • Seitenwände
  • Heckabschlussteile

Standort Lavonia (USA)

LINDE + WIEMANN US Inc.
1720 Knox Bridge Crossing Rd
30553, Lavonia / GA – US
+1 706 460 5900

Von I-85 South Atlanta kommend, Ausfahrt 177 nehmen und am Ende der Ausfahrt rechts abbiegen. Am Stoppschild links abbiegen. Das Werk ist sichtbar auf der linken Seite. Von I-85 North Grenville kommend, Ausfahrt 177 nehmen und am Ende der Ausfahrt links abbiegen. Am Stoppschild links abbiegen. Das Werk ist sichtbar auf der linken Seite.

Technologien

Joining

Produktionsfläche

4.100m²

Produktion der folgenden Komponenten:

  • Cockpit Modulquerträger
  • Domstreben
  • Karosserieverstärkungen

Standort Kecskemet (Ungarn)

LINDE + WIEMANN Montagetechnik Kft
Matkói út 101
HU-6000 Kecskemét
+36 30 230 6653

Von Budapest kommend, Autobahn M5 nehmen
und dann auf Ausfahrt 91 abfahren. Rechts halten und den Schildern von Straße 54 Richtung Kecskemét folgen. An dem zweiten Kreisverkehr, dritte Ausfahrt nehmen und der Straße bis zur Ampel folgen. An der Kreuzung rechts abbiegen und der Straße bis zur zweiten Kreuzung folgen. Hier links abbiegen. Der Straße bis ans Ende folgen. Das Werk befindet sich auf der rechten Seite.

Technologien

Roll-Forming

Joining

Produktionsfläche

5.500m²

Produktion der folgenden Komponenten:

  • Schweller
  • Rahmenteile
  • Türverstärkungen

 

Standort Zaragoza

LINDE + WIEMANN Zaragoza, S.L.U.
C. Aneto, 11
50690 Pedrola, Zaragoza
+34 976 654 724

Von Barcelona Flughafen kommend, C-32 für
10km folgen. Dann AP-7 nehmen und danach AP-2. AP-2 322km folgen und dann Ausfahrt 265 auf A-68 nehmen. A-122 folgen und auf Aneto Street abbiegen. Straße folgen bis das Werk sichtbar ist.

Technologien

Roll-Forming

Joining

Produktionsfläche

7.200m²

Produktion der folgenden Komponenten:

  • Radhäuser
  • Schweller
  • Karosserieverstärkungen

Esparreguera

LINDE + WIEMANN Esparreguera, S.L.U.
Calle Argila, Naves 7-12 (Polígono industrial Magarola Sud)
08292 – Esparreguera (Barcelona) | SPAIN
+34 937708444

Von Barcelona Flughafen kommend, Ausfahrt
196AB Richtung Girona/Lleida nehmen. A-2 folgen, dann Ausfahrt 582BB-23 nehmen. Ceramica Straße für 1km folgen bis das Werk sichtbar ist.

Technologien

Roll-Forming

Joining

Produktionsfläche

3.000m²

Produktion der folgenden Komponenten:

  • Heckabschlussteile
  • Schweller
  • Tür-Führungsschienen

Standort La Garriga

LINDE + WIEMANN, S.A.
Carrer del Mil·lenari de Catalunya 34
08530 La Garriga
+34 93 871 8000

Von Barcelona Flughafen kommend, Ausfahrt
196AB Richtung Girona/Lleida nehmen. A-2 folgen, dann B-23 nehmen und auf AP-7 fahren. Nach 20km Ausfahrt 14 auf C-17 nehmen. Nach 14km Ausfahrt BP-1432 – La Garriga nehmen. Av. Generalitat für circa 1km folgen bis das Werk sichtbar ist.

Technologien

Stamping

Joining

Produktionsfläche

12.200m²

Produktion der folgenden Komponenten:

  • Rahmenteile
  • A-Säulen
  • Karosserieverstärkungen

Standort Benatky

LINDE + WIEMANN CZ s.r.o.
Pražská 707
294 71 Benátky nad Jizerou
+420 730 845 109

Von Prag kommend, Autobahn D10 folgen und
dann Ausfahrt 27 nehmen. Am Ende der Ausfahrt links abbiegen. Geradeaus im Kreisverkehr und dann dritte Straße links abbiegen. Der Straße bis fast ans Ende der Straße folgen. Bis auf der linken Seite das „MTC arel“ Schild sichtbar wird. Das Werk befindet sich in der letzten Halle dieses Bereichs.

Technologie

Roll-Forming

Joining

Produktionsfläche

7.500m²

Produktion der folgenden Komponenten:

  • Dachrahmen
  • Fensterrahmen
  • A-Säulen

 

Standort Lysa

LINDE + WIEMANN CZ s.r.o.
3, U Dráhy 1356
289 22 Lysá nad Labem
+420 325 560 706

Von Prag kommend, Autobahn D11 folgen und
dann Ausfahrt 18 nehmen. Am Ende der Ausfahrt rechts Richtung Lysá n.L. (Straße 272) abbiegen. Der Straße bis Lysá n.L folgen. Nach Überqueren dem Stadtschild an der Kreuzung links abbiegen & dann der Hauptstraße folgen. Nach überqueren der Bahngleisen, am Supermarkt rechts abbiegen. Der Straße bis zur nächsten Kreuzung folgen. Links abbiegen und der Straße folgen bis das Werk sichtbar ist.

Technologien

Stamping

Joining

Produktionsfläche

14.000m²

Produktion der folgenden Komponenten:

  • Dachrahmen
  • Kleinpressteile
  • Ersatzteile

Standort Breclav

LINDE + WIEMANN CZ s.r.o.
Lidická 141
690 03 Břeclav
+420 519 440 620

Von Brno kommend, Autobahn D2 Richtung
Bratislava nehmen. Dann auf Ausfahrt 48 abfahren und an der Kreuzung links Richtung Břeclav abbiegen. Geradeaus über den Kreisverkehr fahren und der Straße folgen bis das Werk sichtbar ist (direkt nach dem Einkaufscenter).

Technologien

Roll-Forming

Joining

Produktionsfläche

12.000m²

Produktion der folgenden Komponenten:

  • Cockpit Modulquerträger
  • Batterieboxen
  • Türverstärkungen

Standort Bremen

LINDE + WIEMANN Deutschland SE
Bergener Str. 4
28307 Bremen
+49 421 3770860

Aus Richtung Osnabrück über A1 kommend die Ausfahrt 55 Bremen-Hemelingen Richtung Hansalinie nehmen, dann links abbiegen auf Europaallee. Nach 900 Metern rechts abbiegen auf Bergener Straße; nach 500 Metern befindet sich das Ziel auf der linken Seite.

Aus Richtung Bremerhaven/Hannover über A27 und aus Richtung Hamburg über A1 kommend die Ausfahrt 55 Bremen-Hemelingen Richtung Bremen Centrum nehmen, dann links halten und geradeaus Richtung Autobahnzubringer Hemelingen fahren. Die Auffahrt Richtung Hansalinie/Autohof nehmen, dann rechts auf Autobahnzubringer Hemelingen einbiegen. Links abbiegen auf Europaallee, anschließend nach 900 Metern rechts abbiegen auf Bergener Straße; nach 500 Metern befindet sich das Ziel auf der linken Seite.

Technologien

Roll-Forming

Joining

Produktionsfläche

18.500m²

Produktion der folgenden Komponenten:

  • Schweller
  • Seitenwände
  • Heckabschlussteile

Standort Elstra

LINDE + WIEMANN Deutschland SE
Am Sandberg 9
01920 Elstra
+49 35793 84 0

Von Bautzen/Görlitz oder Dresden kommend, A4 folgen und die Ausfahrt 87 Burkau nehmen.
Dann der S 94, K9239 folgen und auf der Bischofswerdaer Landstraße bis Elstra-Rauschwitz bleiben.
Dann nach rechts auf „Am Sandberg“ abbiegen, das Werk (Haupteingang/Sekretariat) befindet sich auf der rechten Seite am Ende der Straße.

Technologien

Elstra I

Stamping

Joining

Elstra II

Hot-Forming

Produktionsfläche

Elstra I
16.900m²

Elstra II
13.500m²

Produktion der folgenden Komponenten:

Elstra I

  • Schwellerverstärkungen
  • Heckabschlussteile
  • Rahmenteile

Elstra II

  • A-Säulen
  • Front Querträger
  • Verstärkungsbleche

Standort Hagenbach

LINDE + WIEMANN Deutschland SE
Faureciastraße 4
76767 Hagenbach
+49 7273 8003 11

Von der A65/B10/B09 kommend, am Wörther Kreuz Richtung Hagenbach abfahren. Habsburger Straße / L540 bis zum Kreisverkehr folgen. Im Kreisverkehr 3. Ausfahrt nehmen und auf Rheinstraße / L556 Richtung Neuburg fahren. Im Kreisverkehr 1. Ausfahrt nehmen. Links auf Faureciastraße abbiegen. Am Ende der Strasse befindet sich das Werk.

Technologien

Roll-Forming

Joining

Produktionsfläche

17.000m²

Produktion der folgenden Komponenten:

  • Schweller
  • Rahmenteile
  • Seitenwände

Standort Ingolstadt

LINDE + WIEMANN Deutschland SE
Akeleistraße 11
85055 Ingolstadt
+49 841 90155 0

Auf der A9 von Nürnberg kommend, Ausfahrt Ingolstadt Vohburg nehmen. An der ersten Ausfahrt rechts abbiegen. Kurz danach links über eine kleine Brücke abbiegen. Nach der Brücke rechts abbiegen. Das Werk ist sichtbar auf der linken Seite. Auf der A9 von Nürnberg kommend, Ausfahrt Ingolstadt Nord nehmen. An der Ampel links abbiegen. An der zweiten Ampel erneut links abbiegen. Der Straße folgen und rechts an der ersten Ausfahrt abbiegen. Kurz danach links über eine kleine Brücke abbiegen. Nach der Brücke rechts abbiegen. Das Werk ist sichtbar auf der linken Seite.

Technologien

Stamping

Roll-Forming

Joining

Produktionsfläche

14.800m²

Produktion der folgenden Komponenten:

  • Schweller
  • Querträger
  • Domstreben

Standort Dillenburg Manderbach

Im faulchen 4
35685 Dillenburg

Produktion der folgenden Komponenten:

  • Schweller
  • B-Säule
  • Cockpit

Standort Dillenburg

LINDE + WIEMANN Deutschland SE
Werk Dillenburg – Industriestraße 4-12
35683 Dillenburg
+49 2771 392-0

LINDE + WIEMANN SE & CO. KG
Postfach 15 54
35665 Dillenburg

Auf der Autobahn A45 die Ausfahrt 25 Dillenburg nehmen, dann von der B277 rechts abbiegen auf die B253 Richtung Frankenberg/Biedenkopf, dann bei der großen Ampelanlage zweimal rechts abbiegen auf die Industriestraße.

Technologien

Stamping

Roll-Forming

Joining

Hot-Forming

Produktionsfläche

17.900m²

Produktion der folgenden Komponenten:

  • Türaufprallstreben
  • Querträgerrohre
  • Verstärkungsbleche