Otisk / Soukromí

Provozovatel internetové nabídky:

LINDE + WIEMANN SE & Co. KG
Industriestraße 4-12
D- 35683 Dillenburg
Tel.: +49 2771 392-0
Fax: +49 2771 392-134
postovní prihrádka: 1554, D- 35665 Dillenburg
info@linde-wiemann.com
www.linde-wiemann.com

Představenstvo:
Dipl.-Ing. Michael Lindner, Markus Herber
Obchodní rejstrík:
Amtsgericht Wetzlar / HRA 5061
Císlo DPH:
DE 111 796 636

Odmítnutí odpovednosti

Odkazy (linky), nabízené v rámci nasí internetové stránky, vedou prípadne k cizím obsahum na internetu, které kontrolujeme pri jejich vlození, ale na kterých obsah a správnost nemáme následne zádný vliv. Z tohoto duvodu nemuzeme rovnez prevzít zádnou právní odpovednost za tyto odkazy. Prohlízení techto odkazu se provádí na vlastní riziko a odpovednost. Nemáme také zádný vliv na to, zda tretí osoby vytvárí odkazy na jejich internetovou stránku na nasí internetové stránce. Existence takových odkazu není upozornením na spolupráci s temito firmami nebo doporucení jejich nabídky. Obsah a struktura nasich internetových stránek jsou chráneny vlastnickým pràvem. Rozmnozovàní, rozsirování zverejnování obsahu dulezitých z hlediska vlastnického práva vyzaduje nás predchozí souhlas. Povoleno je vyuzívání obsahu stránek pro vlastí osobní pouzití v rámci zákonných omezení.

Gebze-Kocaeli (Turecko)

LINDE Opsan Otomotiv Parça San. ve Tic.A.Ş.
Makine İhtisas Organize Sanayi Bölgesi Mah 4. Cadde N:13, D:2
41455 Dilovası/Kocaeli, Turecko
+90 262 724 87 39

Jeďte asi 25 minut do Kocaeli po dálnici R80 a potom sjeďte na exitu O7 Kuzey Marmara Otoyolu. Poté sjeďte na exitu Dilovasi Organize Sanayi Bölgesi vpravo. Pokračujte po silnici až k průmyslové zóně Makine Ihtisas OSB, kde se nachází závod. Na první křižovatce odbočte vpravo a pokračujte po 4. Cadde. Závod se nachází na levé straně na konci ulice.

Technologie

Stamping

Roll-Forming

Joining

Oblast výroby

11630m²

Výroba následujících komponentů:

  • Battery support
  • Seat guides
  • Front bumper beams

East London (RSA)

LINDE + WIEMANN RSA (Pty) Ltd.
Plant CE1 Mdubu Road – ZA
East London 5201
+27 43 050 4000

LINDE AND WIEMANN RSA (Pty) Ltd.
Building BW3 Ikhala Rd West – ZA
East London 5201

Při příjezdu z letiště East London odbočte vlevo na Settlers Way. Pokračujte po Setllers Way a odbočte vpravo na Chester Road. Po Chester Road dojeďte ke vjezdu do IDZ. Zde se zaregistrujte u bezpečnostního kontrolora a poté projeďte bezpečnostním vchodem. Na kruhovém objezdu sjeďte druhým výjezdem na Ikhala Road. Poté odbočte vlevo na Madubu Road, zde se nachází CE1 (zpracování kovů) nebo BE4 pro dodávky. Nebo pokračujte rovně po Ikhala Road a poté odbočte vlevo na Ikhala Road West, zde se nachází BW3 (závod).

 

Port Elizabeth (RSA)

LINDE AND WIEMANN RSA (Pty) Ltd.
Unit 8B, Brookes on the Bay – ZA
Port Elizabeth 6013
+27 41 408 6011

Při příjezdu z letiště Port Elizabeth jeďte po Allister Miller Driver. Přejeďte ulici Forest Hill a vjeďte na ulici La Roche Drive. Na světelné křižovatce odbočte vpravo na Beach Road. Odbočte vpravo na Brookes Hill Drive a pak vlevo do Brookes Hill Suites.

Technologie

Roll-Forming

Joining

Výrobní oblast

11.500m²

Výroba následujících komponentů:

  • Sills
  • Side panels
  • Rear end trim parts

Lavonia (USA)

LINDE + WIEMANN US Inc.
1720 Knox Bridge Crossing Rd
30553, Lavonia / GA – US
+1 706 460 5900

Při příjezdu z South Atlanta po dálnici I-85 sjeďte na exitu 177 a na konci výjezdu odbočte vpravo. U cedule Stop odbočte vlevo. Závod se nachází na levé straně. Při příjezdu z North Greenville po dálnici I-85 sjeďte na exitu 177 a na konci výjezdu odbočte vlevo. U cedule Stop odbočte vlevo. Závod se nachází na levé straně.

Technologie

Joining

Výrobní oblast

4.100m²

Výroba následujících komponentů:

  • Cockpit module cross beams
  • Dome struts
  • Car body reinforcements

Kecskemet – Maďarsko

LINDE + WIEMANN Montagetechnik Kft
Matkói út 101
HU-6000 Kecskemét
+36 30 230 6653

Při příjezdu z Budapešti jeďte po dálnici M5 a sjeďte na exitu 91. Držte se vpravo a sledujte značení na silnici 54 směrem na Kecskemét. Na druhém kruhovém objezdu sjeďte třetím výjezdem a pokračujte po silnici až ke světelné křižovatce. Na křižovatce odbočte vpravo a pokračujte po silnici až na druhou křižovatku. Zde odbočte vlevo. Jeďte po této silnici až na konec. Závod se nachází po pravé straně.

Technologie

Roll-Forming

Joining

Výrobní oblast

5.500m²

Výroba následujících komponentů:

  • Sills
  • Frame components
  • Door reinforcements

 

Tianjin (Čína)

Baokang Ave, Baodi District
Tianjin, China, 301816
+86 22-4184445

Při příjezdu z města Tchien-ťin jeďte po rychlostní silnici S1 k mýtné stanici Baodi. Zde sjeďte z dálnice a pokračujte po západním vnějším okruhu ke křižovatce s ulicí Tangtong. Odbočte vlevo, pokračujte ulicí jeden blok a pak odbočte vpravo. Pokračujte ulicí jeden blok a pak odbočte vlevo. Jeďte rovně až na konec ulice. Závod se nachází po levé straně.

Technologie

Stamping

Roll-Forming

Joining

Oblast výroby

40.000m²

Výroba následujících komponentů:

  • Sills
  • Door & window beams
  • A-Pillars

Chongqing (Čína)

Jing He Street, No. 888,
Gongzhuling EDZ
+86 A29434-8890900

Při příjezdu z města Changchun jeďte rovně po silnici Qiche ke křižovatce s ulicí Binhe. Zde odbočte vpravo a pokračujte ulicí jeden blok. Pak odbočte vlevo na silnici Jinghe a jeďte rovně 800 metrů. Závod se nachází po pravé straně.

Technologie

Roll-Forming

Joining

Oblast výroby

4.000m²

Výroba následujících komponentů:

  • A-Pillars
  • Door impact struts
  • Cross beams

Changchun (Čína)

Jing He Street, No. 888,
Gongzhuling EDZ
+86 A29434-8890900

Při příjezdu z města Changchun jeďte rovně po silnici Qiche ke křižovatce s ulicí Binhe. Zde odbočte vpravo a pokračujte ulicí jeden blok. Pak odbočte vlevo na silnici Jinghe a jeďte rovně 800 metrů. Závod se nachází po pravé straně.

Technologie

Roll-Forming

Joining

Oblast výroby

30.000m²

Výroba následujících komponentů:

  • Module cross beams
  • Sills
  • Front bumper beams

Zaragoza

LINDE + WIEMANN Zaragoza, S.L.U.
C. Aneto, 11
50690 Pedrola, Zaragoza
+34 976 654 724

Při příjezdu z letiště v Barceloně jeďte 10 km po silnici C-32. Pokračujte po silnici AP-7 a pak AP-2. Pokračujte po silnici AP-2 322 km a poté sjeďte na exitu 265 na A-68. Pokračujte po silnici A-122 a odbočte na ulici Aneto. Pokračujte po této ulici, dokud neuvidíte závod.

Technologie

Roll-Forming

Joining

Oblast výroby

7.200m²

Výroba následujících komponentů:

  • Car wheel arches
  • Sills
  • Car body reinforcements

 

Esparreguera

LINDE + WIEMANN Esparreguera, S.L.U.
Calle Argila, Naves 7-12 (Polígono industrial Magarola Sud)
08292 – Esparreguera (Barcelona) | SPAIN
+34 937708444

Při příjezdu z letiště v Barceloně sjeďte na exitu 196AB směrem na Gironu/Lleidu. Pokračujte po dálnici A-2, pak sjeďte na exitu 582BB-23. Jeďte 1 km po ulici Ceramica, dokud neuvidíte závod.

Technologie

Roll-Forming

Joining

Oblast výroby

3.000m²

Výroba následujících komponentů:

  • Rear end trim parts
  • Sills
  • Door guiding beams

La Garriga

LINDE + WIEMANN, S.A.
Carrer del Mil·lenari de Catalunya 34
08530 La Garriga
+34 93 871 8000

Při příjezdu z letiště v Barceloně sjeďte na exitu 196AB směrem na Gironu/Lleidu. Pokračujte po silnici A-2, pak B-23 a jeďte po silnici AP-7. Po 20 km sjeďte na exitu 14 na silnici C-17. Po 14 km sjeďte na exitu BP-1432 – La Garriga. Pokračujte po ulici Av. Generalitat asi 1 km, dokud neuvidíte závod.

Technologie

Stamping

Joining

Oblast výroby

12.200m²

Výroba následujících komponentů:

  • Frame components
  • A-Pillars
  • Car body reinforcements

Benátky

LINDE + WIEMANN CZ s.r.o.
Pražská 707
294 71 Benátky nad Jizerou
+420 730 845 109

Při příjezdu z Prahy jeďte po dálnici D10 a poté sjeďte na exitu 27. Na konci výjezdu odbočte vlevo. Na kruhovém objezdu jeďte rovně a silnici opusťte třetí ulicí vlevo. Pokračujte po silnici téměř až na konec města, dokud neuvidíte po levé straně ceduli „MTC areál“. Závod se nachází v poslední hale tohoto areálu.

Technologie

Roll-Forming

Joining

Oblast výroby

7.500m²

Výroba následujících komponentů:

  • Roof frame
  • Window beams
  • A-Pillars

 

Lysá

LINDE + WIEMANN CZ s.r.o.
3, U Dráhy 1356
289 22 Lysá nad Labem
+420 325 560 706

Při příjezdu z Prahy jeďte po dálnici D11 a poté sjeďte na exitu 18. Na konci exitu odbočte vpravo směrem na Lysou n. L. (silnice 272). Po této silnici jeďte až do Lysé n. L. Za cedulí města odbočte na křižovatce vlevo a pokračujte po hlavní silnici. Po přejetí železniční trati odbočte u supermarketu doprava. Pokračujte po silnici až k další křižovatce. Odbočte vlevo a pokračujte po silnici, dokud neuvidíte závod.

Technologie

Stamping

Joining

Oblast výroby

14.000m²

Výroba následujících komponentů:

  • Roof frame
  • Small pressed parts
  • Replacement parts

Břeclav

LINDE + WIEMANN CZ s.r.o.
Lidická 141
690 03 Břeclav
+420 519 440 620

Při příjezdu z Brna jeďte po dálnici D2 směrem na Bratislavu. Poté sjeďte na exitu 48 a na křižovatce odbočte vlevo na Břeclav. Jeďte rovně přes kruhový objezd a pokračujte po silnici, dokud neuvidíte závod (hned za nákupním centrem).

Technologie

Roll-Forming

Joining

Oblast výroby

12.000m²

Výroba následujících komponentů:

  • Cockpit module cross beams
  • Battery boxes
  • Door reinforcements

Brémy

LINDE + WIEMANN Deutschland SE
Bergener Str. 4
28307 Bremen
+49 421 3770860

Při příjezdu od Osnabrücku po dálnici A1 sjeďte na exitu 55 Bremen-Hemelingen směrem na Hansalinie a poté odbočte vlevo na ulici Europaallee. Po 900 metrech odbočte vpravo na ulici Bergener Straße, po 500 metrech je cíl vlevo.

Při příjezdu od Bremerhavenu/Hannoveru po dálnici A27 a od Hamburku po dálnici A1 sjeďte z dálnice na exitu 55 Bremen-Hemelingen směrem na Bremen Centrum, pak se držte vlevo a jeďte rovně k dálničnímu přivaděči Hemelingen. Sjeďte na výjezdu směrem na Hansalinie/Autohof, poté odbočte vpravo na dálniční přivaděč Hemelingen. Odbočte vlevo na ulici Europaallee, po 900 metrech odbočte vpravo na ulici Bergener Straße a po 500 metrech se cíl cesty nachází vlevo.

Technologie

Roll-Forming

Joining

Oblast výroby

18.500m²

Výroba následujících komponentů:

  • Sills
  • Side panels
  • Rear end trim parts

Elstra

LINDE + WIEMANN Deutschland SE
Am Sandberg 9
01920 Elstra
+49 35793 84 0

Při příjezdu od Budyšína/Görlitzu nebo Drážďan sjeďte z dálnice A4 na exitu 87 Burkau.
Pak jeďte po silnici S 94, K9239 a pokračujte po silnici Bischofswerdaer Landstraße až do Elstra-Rauschwitz.
Poté odbočte vpravo na ulici „Am Sandberg“, závod (hlavní vchod/sekretariát) se nachází na konci ulice po pravé straně.

Technologie

Elsta I

Stamping

Joining

Elsta II

Hot-Forming

Oblast výroby

ELsta I
16.900m²

ELsta II
13.500m²

Výroba následujících komponentů:

Elsta I

  • Sill reinforcements
  • Rear end trim parts
  • Frame components

Elsta II

  • A-Pillars
  • Front cross beams
  • Reinforcement panels

Hagenbach

LINDE + WIEMANN Deutschland SE
Faureciastraße 4
76767 Hagenbach
+49 7273 8003 11

Při příjezdu z dálnice A65/B10/B09 sjeďte na Wörther Kreuz ve směru na Hagenbach. Pokračujte po silnici Habsburger Straße/L540 ke kruhovému objezdu. Z kruhového výjezdu sjeďte třetím výjezdem a jeďte po silnici Rheinstraße/L556 směrem na Neuburg. Z kruhového výjezdu sjeďte prvním výjezdem. Odbočte vlevo na ulici Faureciastraße. Na konci ulice se nachází závod.

Technologie

Roll-Forming

Joining

Oblast výroby

17.000m²

Výroba následujících komponentů:

  • Sills
  • Frame components
  • Side panels

Ingolstadt

LINDE + WIEMANN Deutschland SE
Akeleistraße 11
85055 Ingolstadt
+49 841 90155 0

Na dálnici A9 ve směru od Norimberk sjeďte na exitu Ingolstadt Vohburg. Na prvním výjezdu odbočte vpravo. Vzápětí odbočte vlevo přes malý most. Za mostem odbočte vpravo. Závod se nachází na levé straně. Na dálnici A9 ve směru od Norimberku sjeďte na exitu Ingolstadt Nord. Na světelné křižovatce odbočte vlevo. Na druhé světelné křižovatce odbočte opět vlevo. Pokračujte po silnici a na prvním výjezdu odbočte vpravo. Vzápětí odbočte vlevo přes malý most. Za mostem odbočte vpravo. Závod se nachází na levé straně.

Technologie

Stamping

Roll-Forming

Joining

Oblast výroby

14.800m²

Výroba následujících komponentů:

  • Sills
  • Cross beams
  • Dome struts

Dillenburg

LINDE + WIEMANN Deutschland SE
Werk Dillenburg – Industriestraße 4-12
35683 Dillenburg
+49 2771 392-0

LINDE + WIEMANN SE & CO. KG
Postfach 15 54
35665 Dillenburg

Na dálnici A45 sjeďte na exitu 25 Dillenburg, poté odbočte z dálnice B277 vpravo na dálnici B253 směrem na Frankenberg/Biedenkopf a na velké světelné křižovatce odbočte dvakrát doprava na ulici Industriestraße.

Technologie

Stamping

Roll-Forming

Joining

Hot-Forming

Oblast výroby

17.900m²

Výroba následujících komponentů:

  • Door impact struts
  • Cross member tubes
  • Reinforcement plates

Gebze-Kocaeli (Turkey)

LINDE Opsan Otomotiv Parça San. ve Tic.A.Ş.
Makine İhtisas Organize Sanayi Bölgesi Mah 4. Cadde N:13, D:2
41455 Dilovası/Kocaeli, Turkey
+90 262 724 87 39

Take R80 Highway road to Kocaeli. Follow the road approximately 25 mins and take the O7 Kuzey Marmara Otoyolu exit. Then take Dilovasi Organize Sanayi Bölgesi exit on the right. Follow the road to Makine Ihtisas OSB – Industrial Area in which the plant is located. Take the first right and follow the 4. Cadde. You can see the plant at the end of the road on the left.

Technologies

Stamping

Roll-Forming

Joining

Production area

11630m²

Production of the following components:

  • Battery support
  • Seat guides
  • Front bumper beams

East London (South Africa)

LINDE + WIEMANN RSA (Pty) Ltd.
Plant CE1 Mdubu Road – ZA
East London 5201
+27 43 050 4000

LINDE AND WIEMANN RSA (Pty) Ltd.
Building BW3 Ikhala Rd West – ZA
East London 5201

From the East London Airport, turn left onto Settlers Way. Head along Settlers Way and turn right into Chester Road. Continue on Chester Road to the entrance of the IDZ. Sign in at Security and pass the Security Entrance. At the roundabout, take the 2nd exit into Ikhala Road. Take the 3rd left into Madubu Road to access CE1 (Metal Treatment) or BE4 for deliveries or continue straight on Ikhala Road and take a left onto Ikhala Road West to access BW3 (Assembly Plant).

 

Port Elizabeth (South Africa)

LINDE AND WIEMANN RSA (Pty) Ltd.
Unit 8B, Brookes on the Bay – ZA
Port Elizabeth 6013
+27 41 408 6011

From the Port Elizabeth Airport, follow Allister Miller Drive. Cross Forest Hill Road into La Roche Drive. At the traffic light, turn right into Beach Road. Turn right into Brookes Hill Drive and then left onto Brookes Hill Suites.

Technologies

Roll-Forming

Joining

Production area

11.500m²

Production of the following components:

  • Sills
  • Side panels
  • Rear end trim parts

Lavonia (USA)

LINDE + WIEMANN US Inc.
1720 Knox Bridge Crossing Rd
30553, Lavonia / GA – US
+1 706 460 5900

Coming from Atlanta take exit 177
on I-85 South, turn right, at the 4 way stop sign turn left – plant is visible on the left hand side; coming from Greenville take exit 177 on I-85 North, turn left, at the 4 way stop sign turn left – plant is visible on the left hand side.

Technologies

Joining

Production area

4.100m²

Production of the following components:

  • Cockpit module cross beams
  • Dome struts
  • Car body reinforcements

Kecskemet (Ungarn)

LINDE + WIEMANN Montagetechnik Kft
Matkói út 101
HU-6000 Kecskemét
+36 30 230 6653

Coming from Budapest, take highway M5. Then take exit 91 and stay on the right side following the signs to road 54, direction Kecskemét. At the second roundabout take the third exit and follow the street until you reach the traffic light. At the junction turn right and then take the second street on the left side. Follow the road until the end. The plant will be visible on the right side.

Technologies

Roll-Forming

Joining

Production area

5.500m²

Production of the following components:

  • Sills
  • Frame components
  • Door reinforcements

 

Tianjin (China)

Baokang Ave, Baodi District
Tianjin, China, 301816
+86 22-4184445

Coming from Tianjin city take expressway S1 until Baodi toll station, take the exit and follow along West outer ring Road until the junction with Tangtong street. Turn left and follow the road for one block. Turn right and follow the road again for one block. Then turn left and follow the road until the end of the street. The plant is visible on the left hand side.

Technologies

Stamping

Roll-Forming

Joining

Production area

40.000m²

Production of the following components:

  • Sills
  • Door & window beams
  • A-Pillars

Chongqing (China)

Jing He Street, No. 888,
Gongzhuling EDZ
+86 A29434-8890900

Coming from Changchun city along Qiche Road go straight until the junction with Binhe Street, turn right and keep going for one block. Turn left to Jinghe Road and go straight for 800 meters. The plant is visible on the right hand side.

Technologies

Roll-Forming

Joining

Production area

4.000m²

Production of the following components:

  • A-Pillars
  • Door impact struts
  • Cross beams

Changchun (China)

Jing He Street, No. 888,
Gongzhuling EDZ
+86 A29434-8890900

Coming from Changchun city along Qiche Road go straight until the junction with Binhe Street, turn right and keep going for one block. Turn left to Jinghe Road and go straight for 800 meters. The plant is visible on the right hand side.

Technologies

Roll-Forming

Joining

Production area

30.000m²

Production of the following components:

  • Module cross beams
  • Sills
  • Front bumper beams

Zaragoza

LINDE + WIEMANN Zaragoza, S.L.U.
C. Aneto, 11
50690 Pedrola, Zaragoza
+34 976 654 724

Coming from Barcelona Airport take C-32, after 10
km take AP-7, and after take AP-2. Conitnue 311 km and take exit 265 to A-68. Continue on A-122 and take Aneto Street, and after 1 km you will be in Linde + Wiemann Zaragoza.

Technologies

Roll-Forming

Joining

Production area

7.200m²

Production of the following components:

  • Car wheel arches
  • Sills
  • Car body reinforcements

 

Esparreguera

LINDE + WIEMANN Esparreguera, S.L.U.
Calle Argila, Naves 7-12 (Polígono industrial Magarola Sud)
08292 – Esparreguera (Barcelona) | SPAIN
+34 937708444

Coming from Barcelona Airport take exit 196AB
direction Girona/Lleida. Continue on A-2. Take exit 582B. Take Ceramica Street for 1 km and you will arrive to Linde + Wiemann Esparraguera.

Technologies

Roll-Forming

Joining

Production area

3.000m²

Production of the following components:

  • Rear end trim parts
  • Sills
  • Door guiding beams

La Garriga

LINDE + WIEMANN, S.A.
Carrer del Mil·lenari de Catalunya 34
08530 La Garriga
+34 93 871 8000

Coming from Barcelona Airport take exit 196AB
direction Girona/Lleida. Continue on A-2, take B-23 and after take interstate AP-7. After 20 km take exit 14 to C-17. After 14km take exit BP-1432 – La Garriga. After 1 km on Av. Generalitat you will be able to see Linde + Wiemann La Garriga.

Technologies

Stamping

Joining

Production area

12.200m²

Production of the following components:

  • Frame components
  • A-Pillars
  • Car body reinforcements

Benatky

LINDE + WIEMANN CZ s.r.o.
Pražská 707
294 71 Benátky nad Jizerou
+420 730 845 109

Coming from Prague, follow highway D10 and take exit 27. At the end of the exit, turn left. After passing roundabout straight ahead, take 3rd street on the left. Almost at the end of the city, you will see on the left side “MTC areal” sign. The plant is the last hall in the area.

Technologies

Roll-Forming

Joining

Production area

7.500m²

Production of the following components:

  • Roof frame
  • Window beams
  • A-Pillars

 

Lysa

LINDE + WIEMANN CZ s.r.o.
3, U Dráhy 1356
289 22 Lysá nad Labem
+420 325 560 706

Coming from Prague, follow highway D11 and take exit 18. Turn right after the exit to Lysá n.L. (road 272). Follow the street until you arrived in Lysá n.L., right after the city, turn left at junction & then follow the main road. After passing the railway tracks, you will reach a supermarket. Turn right around the supermarket. Follow the street until you reach the next junction. Turn left and follow the road until you reach the plant.

Technologies

Stamping

Joining

Production area

14.000m²

Production of the following components:

  • Roof frame
  • Small pressed parts
  • Replacement parts

Breclav

LINDE + WIEMANN CZ s.r.o.
Lidická 141
690 03 Břeclav
+420 519 440 620

Coming from Brno, take highway number D2
direction Bratislava. Take the exit 48 and turn left at the junction, direction Břeclav. Pass the roundabout straight ahead and you will see the plant on the right side just behind the shopping mall.

Technologies

Roll-Forming

Joining

Production area

12.000m²

Production of the following components:

  • Cockpit module cross beams
  • Battery boxes
  • Door reinforcements

Bremen

LINDE + WIEMANN Deutschland SE
Bergener Str. 4
28307 Bremen
+49 421 3770860

Coming from Osnabrück via A1, take exit 55
Bremen-Hemelingen direction Hansalinie, then turn left on Europaallee. After 900 m turn right on Bergener Straße. Gollow the street for 500 meter, the plant will be on the left side.

Coming from Bremerhaven/Hannover via A27 and coming from Hamburg via A1, take exit 55 Bremen-Hemelingen, direction Bremen Centrum. Kkeep left and follow the feeder road straight ahead direction Hemelingen. Take the highway ramp direction Hansalinie/Autohof and turn into feeder road Hemelingen. Turn left on Europaallee, follow the street, after 900 meters turn right on Bergener Straße; follow the road for 500 meters, the plant will be on the left side.

Technologies

Roll-Forming

Joining

Production area

18.500m²

Production of the following components:

  • Sills
  • Side panels
  • Rear end trim parts

Elstra

LINDE + WIEMANN Deutschland SE
Am Sandberg 9
01920 Elstra
+49 35793 84 0

Coming from Bautzen/Görlitz or Dresden, follow A4 and take exit 87 Burkau. Follow S 94, K9239 Bischofswerdaer Landstraße until Elstra-Rauschwitz. Turn right at Am Sandberg. The plant is on the right hand side at the end of the road.

Technologies

Elsta I

Stamping

Joining

Elsta II

Hot-Forming

Production area

ELsta I
16.900m²

ELsta II
13.500m²

Production of the following components:

Elsta I

  • Sill reinforcements
  • Rear end trim parts
  • Frame components

Elsta II

  • A-Pillars
  • Front cross beams
  • Reinforcement panels

Hagenbach

LINDE + WIEMANN Deutschland SE
Faureciastraße 4
76767 Hagenbach
+49 7273 8003 11

Coming from A65/B10/B09, take exit Wörther Kreuz direction Hagenbach. Follow Habsburger Straße / L540 until the roundabout. Take third exit in the roundabout and follow Rheinstraße / L556 direction Neuburg until you reach another roundabout. Take first exit in the roundabout and then turn left on Faurecia street. Follow the street until the plant is visible.

Technologies

Roll-Forming

Joining

Production area

17.000m²

Production of the following components:

  • Sills
  • Frame components
  • Side panels

Ingolstadt

LINDE + WIEMANN Deutschland SE
Akeleistraße 11
85055 Ingolstadt
+49 841 90155 0

Coming from Nuremberg on the A9, take the Ingolstadt Vohburg exit. Turn right at the first exit and shortly after turn left over the small bridge. After the bridge turn right. The plant is visible on the left hand side. Coming from Nuremberg on the A9, take the Ingolstadt Nord exit. Turn left at the traffic light, followed by left again at the second traffic light. Turn right at the first exit and shortly after turn left over the small bridge. After the bridge turn right. The plant is visible on the left hand side.

Technologies

Stamping

Roll-Forming

Joining

Production area

14.800m²

Production of the following components:

  • Sills
  • Cross beams
  • Dome struts

Dillenburg

LINDE + WIEMANN Deutschland SE
Werk Dillenburg – Industriestraße 4-12
35683 Dillenburg
+49 2771 392-0

LINDE + WIEMANN SE & CO. KG
Postfach 15 54
35665 Dillenburg

On interstate A45 take exit 25 Dillenburg. Follow
B277 until you can turn right on B253 direction Frankenberg/Biedenkopf. Follow the road until the big lights and turn immediately right twice on Industriestraße. You will then see the plant.

Technologies

Stamping

Roll-Forming

Joining

Hot-Forming

Production area

17.900m²

Production of the following components:

  • Door impact struts
  • Cross member tubes
  • Reinforcement plates

Standort Chongqing (China)

Jing He Street, No. 888,
Gongzhuling EDZ
+86 A29434-8890900

Von der Stadt Changchun kommend, geradeaus auf der Qiche Road bizszur Kreuzung Binhe Street fahren. Hier rechts abbiegen und der Straße für einen Block folgen. Dann links auf Jinghe Road abbiegen und 800 Meter geradeaus fahren. Das Werk ist auf rechten Seite sichtbar.

Technologien

Roll-Forming

Joining

Produktionsfläche

4.000m²

Produktion der folgenden Komponenten:

  • A-Säulen
  • Türaufprallstreben
  • Querträger

Standort Gebze-Kocaeli (Türkei)

LINDE Opsan Otomotiv Parça San. ve Tic.A.Ş.
Makine İhtisas Organize Sanayi Bölgesi Mah 4. Cadde N:13, D:2
41455 Dilovası/Kocaeli, Türkei
+90 262 724 87 39

R80 Highway nach Kocaeli für circa 25 Minuten folgen und dann O7 Kuzey Marmara Otoyolu Ausfahrt nehmen. Danach Dilovasi Organize Sanayi Bölgesi Ausfahrt rechts nehmen. Der Straße bis zu Makine Ihtisas OSB – Industrial Area folgende, in welcher sich das Werk befindet. Die erste Kreuzung rechts abbiegen und 4. Cadde folgen. Das Werk befindet sich auf der linken Seite am Ende der Straße.

Technologien

Stamping

Roll-Forming

Joining

Produktionsfläche

11630m²

Produktion der folgenden Komponenten:

  • Batteriehalterung
  • Sitzschienen
  • Stoßfängerträger

 

Standort Changchun (China)

Jing He Street, No. 888,
Gongzhuling EDZ
+86 A29434-8890900

Von der Stadt Changchun kommend, geradeaus auf der Qiche Road bis zur Kreuzung Binhe Street fahren. Hier rechts abbiegen und der Straße für einen Block folgen. Dann links auf Jinghe Road abbiegen und 800 Meter geradeaus fahren. Das Werk ist auf rechten Seite sichtbar.

Technologien

Roll-Forming

Joining

Produktionsfläche

30.000m²

Produktion der folgenden Komponenten:

  • Modulquerträger
  • Schweller
  • Stoßfängerträger

Standort Tianjin (China)

Baokang Ave, Baodi District
Tianjin, China, 301816
+86 22-4184445

Von der Stadt Tianjin kommend, Expressway S1 bis zur Mautstelle Baodi folgen. Hier vom Expressway abfahren und der West Outer Ring Road bis zur Kreuzung Tangtong Street folgen. Links abbiegen, der Straße einen Block lang folgen, dann rechts abbiegen. Der Straße erneut für einen Block folgen und dann links abbiegen. Geradeaus bis zum Ende der Straße fahren. Das Werk ist sichtbar auf der linken Seite.

Technologien

Stamping

Roll-Forming

Joining

Produktionsfläche

40.000m²

Produktion der folgenden Komponenten:

  • Schweller
  • Tür- und Fensterrahmen
  • A-Säulen

 

Standort East London (Südafrika)

LINDE + WIEMANN RSA (Pty) Ltd.
Plant CE1 Mdubu Road – ZA
East London 5201
+27 43 050 4000

LINDE AND WIEMANN RSA (Pty) Ltd.
Building BW3 Ikhala Rd West – ZA
East London 5201

Vom East London Flughafen kommend, links auf Settlers Way abbiegen. Settlers Way folgen und rechts auf Chester Road abbiegen. Chester Road bis zum Eingang des IDZ folgen. Hier bei der Sicherheitskontrolle anmelden und dann den Sicherheitseingang passieren. Im Kreisverkehr zweite Ausfahrt auf Ikhala Road nehmen. Dann links auf Madubu Road abbiegen um CE1 (Metal Treatment) oder BE4 für Anlieferungen zu gelangen. Oder weiter auf Ikhala Road geradeaus fahren und dann links auf Ikhala Road West abbiegen, um zu BW3 (Werk) zu gelangen.

 

Standort Port Elizabeth (Südafrika)

LINDE AND WIEMANN RSA (Pty) Ltd.
Unit 8B, Brookes on the Bay – ZA
Port Elizabeth 6013
+27 41 408 6011

Vom Port Elizabeth Flughafen kommend, Allister Miller Driver folgen. Forest Hill Road kreuzen um auf La Roche Drive zu gelangen. An der Ampel rechts in Beach Road abbiegen. Rechts in Brookes Hill Drive abbiegen und danach links in Brookes Hill Suites.

Technologien:

Roll-Forming

Joining

Produktionsfläche

11.500m²

Produktion der folgenden Komponenten:

  • Schweller
  • Seitenwände
  • Heckabschlussteile

Standort Lavonia (USA)

LINDE + WIEMANN US Inc.
1720 Knox Bridge Crossing Rd
30553, Lavonia / GA – US
+1 706 460 5900

Von I-85 South Atlanta kommend, Ausfahrt 177 nehmen und am Ende der Ausfahrt rechts abbiegen. Am Stoppschild links abbiegen. Das Werk ist sichtbar auf der linken Seite. Von I-85 North Grenville kommend, Ausfahrt 177 nehmen und am Ende der Ausfahrt links abbiegen. Am Stoppschild links abbiegen. Das Werk ist sichtbar auf der linken Seite.

Technologien

Joining

Produktionsfläche

4.100m²

Produktion der folgenden Komponenten:

  • Cockpit Modulquerträger
  • Domstreben
  • Karosserieverstärkungen

Standort Kecskemet (Ungarn)

LINDE + WIEMANN Montagetechnik Kft
Matkói út 101
HU-6000 Kecskemét
+36 30 230 6653

Von Budapest kommend, Autobahn M5 nehmen
und dann auf Ausfahrt 91 abfahren. Rechts halten und den Schildern von Straße 54 Richtung Kecskemét folgen. An dem zweiten Kreisverkehr, dritte Ausfahrt nehmen und der Straße bis zur Ampel folgen. An der Kreuzung rechts abbiegen und der Straße bis zur zweiten Kreuzung folgen. Hier links abbiegen. Der Straße bis ans Ende folgen. Das Werk befindet sich auf der rechten Seite.

Technologien

Roll-Forming

Joining

Produktionsfläche

5.500m²

Produktion der folgenden Komponenten:

  • Schweller
  • Rahmenteile
  • Türverstärkungen

 

Standort Zaragoza

LINDE + WIEMANN Zaragoza, S.L.U.
C. Aneto, 11
50690 Pedrola, Zaragoza
+34 976 654 724

Von Barcelona Flughafen kommend, C-32 für
10km folgen. Dann AP-7 nehmen und danach AP-2. AP-2 322km folgen und dann Ausfahrt 265 auf A-68 nehmen. A-122 folgen und auf Aneto Street abbiegen. Straße folgen bis das Werk sichtbar ist.

Technologien

Roll-Forming

Joining

Produktionsfläche

7.200m²

Produktion der folgenden Komponenten:

  • Radhäuser
  • Schweller
  • Karosserieverstärkungen

Esparreguera

LINDE + WIEMANN Esparreguera, S.L.U.
Calle Argila, Naves 7-12 (Polígono industrial Magarola Sud)
08292 – Esparreguera (Barcelona) | SPAIN
+34 937708444

Von Barcelona Flughafen kommend, Ausfahrt
196AB Richtung Girona/Lleida nehmen. A-2 folgen, dann Ausfahrt 582BB-23 nehmen. Ceramica Straße für 1km folgen bis das Werk sichtbar ist.

Technologien

Roll-Forming

Joining

Produktionsfläche

3.000m²

Produktion der folgenden Komponenten:

  • Heckabschlussteile
  • Schweller
  • Tür-Führungsschienen

Standort La Garriga

LINDE + WIEMANN, S.A.
Carrer del Mil·lenari de Catalunya 34
08530 La Garriga
+34 93 871 8000

Von Barcelona Flughafen kommend, Ausfahrt
196AB Richtung Girona/Lleida nehmen. A-2 folgen, dann B-23 nehmen und auf AP-7 fahren. Nach 20km Ausfahrt 14 auf C-17 nehmen. Nach 14km Ausfahrt BP-1432 – La Garriga nehmen. Av. Generalitat für circa 1km folgen bis das Werk sichtbar ist.

Technologien

Stamping

Joining

Produktionsfläche

12.200m²

Produktion der folgenden Komponenten:

  • Rahmenteile
  • A-Säulen
  • Karosserieverstärkungen

Standort Benatky

LINDE + WIEMANN CZ s.r.o.
Pražská 707
294 71 Benátky nad Jizerou
+420 730 845 109

Von Prag kommend, Autobahn D10 folgen und
dann Ausfahrt 27 nehmen. Am Ende der Ausfahrt links abbiegen. Geradeaus im Kreisverkehr und dann dritte Straße links abbiegen. Der Straße bis fast ans Ende der Straße folgen. Bis auf der linken Seite das „MTC arel“ Schild sichtbar wird. Das Werk befindet sich in der letzten Halle dieses Bereichs.

Technologie

Roll-Forming

Joining

Produktionsfläche

7.500m²

Produktion der folgenden Komponenten:

  • Dachrahmen
  • Fensterrahmen
  • A-Säulen

 

Standort Lysa

LINDE + WIEMANN CZ s.r.o.
3, U Dráhy 1356
289 22 Lysá nad Labem
+420 325 560 706

Von Prag kommend, Autobahn D11 folgen und
dann Ausfahrt 18 nehmen. Am Ende der Ausfahrt rechts Richtung Lysá n.L. (Straße 272) abbiegen. Der Straße bis Lysá n.L folgen. Nach Überqueren dem Stadtschild an der Kreuzung links abbiegen & dann der Hauptstraße folgen. Nach überqueren der Bahngleisen, am Supermarkt rechts abbiegen. Der Straße bis zur nächsten Kreuzung folgen. Links abbiegen und der Straße folgen bis das Werk sichtbar ist.

Technologien

Stamping

Joining

Produktionsfläche

14.000m²

Produktion der folgenden Komponenten:

  • Dachrahmen
  • Kleinpressteile
  • Ersatzteile

Standort Breclav

LINDE + WIEMANN CZ s.r.o.
Lidická 141
690 03 Břeclav
+420 519 440 620

Von Brno kommend, Autobahn D2 Richtung
Bratislava nehmen. Dann auf Ausfahrt 48 abfahren und an der Kreuzung links Richtung Břeclav abbiegen. Geradeaus über den Kreisverkehr fahren und der Straße folgen bis das Werk sichtbar ist (direkt nach dem Einkaufscenter).

Technologien

Roll-Forming

Joining

Produktionsfläche

12.000m²

Produktion der folgenden Komponenten:

  • Cockpit Modulquerträger
  • Batterieboxen
  • Türverstärkungen

Standort Bremen

LINDE + WIEMANN Deutschland SE
Bergener Str. 4
28307 Bremen
+49 421 3770860

Aus Richtung Osnabrück über A1 kommend die Ausfahrt 55 Bremen-Hemelingen Richtung Hansalinie nehmen, dann links abbiegen auf Europaallee. Nach 900 Metern rechts abbiegen auf Bergener Straße; nach 500 Metern befindet sich das Ziel auf der linken Seite.

Aus Richtung Bremerhaven/Hannover über A27 und aus Richtung Hamburg über A1 kommend die Ausfahrt 55 Bremen-Hemelingen Richtung Bremen Centrum nehmen, dann links halten und geradeaus Richtung Autobahnzubringer Hemelingen fahren. Die Auffahrt Richtung Hansalinie/Autohof nehmen, dann rechts auf Autobahnzubringer Hemelingen einbiegen. Links abbiegen auf Europaallee, anschließend nach 900 Metern rechts abbiegen auf Bergener Straße; nach 500 Metern befindet sich das Ziel auf der linken Seite.

Technologien

Roll-Forming

Joining

Produktionsfläche

18.500m²

Produktion der folgenden Komponenten:

  • Schweller
  • Seitenwände
  • Heckabschlussteile

Standort Elstra

LINDE + WIEMANN Deutschland SE
Am Sandberg 9
01920 Elstra
+49 35793 84 0

Von Bautzen/Görlitz oder Dresden kommend, A4 folgen und die Ausfahrt 87 Burkau nehmen.
Dann der S 94, K9239 folgen und auf der Bischofswerdaer Landstraße bis Elstra-Rauschwitz bleiben.
Dann nach rechts auf „Am Sandberg“ abbiegen, das Werk (Haupteingang/Sekretariat) befindet sich auf der rechten Seite am Ende der Straße.

Technologien

Elstra I

Stamping

Joining

Elstra II

Hot-Forming

Produktionsfläche

Elstra I
16.900m²

Elstra II
13.500m²

Produktion der folgenden Komponenten:

Elstra I

  • Schwellerverstärkungen
  • Heckabschlussteile
  • Rahmenteile

Elstra II

  • A-Säulen
  • Front Querträger
  • Verstärkungsbleche

Standort Hagenbach

LINDE + WIEMANN Deutschland SE
Faureciastraße 4
76767 Hagenbach
+49 7273 8003 11

Von der A65/B10/B09 kommend, am Wörther Kreuz Richtung Hagenbach abfahren. Habsburger Straße / L540 bis zum Kreisverkehr folgen. Im Kreisverkehr 3. Ausfahrt nehmen und auf Rheinstraße / L556 Richtung Neuburg fahren. Im Kreisverkehr 1. Ausfahrt nehmen. Links auf Faureciastraße abbiegen. Am Ende der Strasse befindet sich das Werk.

Technologien

Roll-Forming

Joining

Produktionsfläche

17.000m²

Produktion der folgenden Komponenten:

  • Schweller
  • Rahmenteile
  • Seitenwände

Standort Ingolstadt

LINDE + WIEMANN Deutschland SE
Akeleistraße 11
85055 Ingolstadt
+49 841 90155 0

Auf der A9 von Nürnberg kommend, Ausfahrt Ingolstadt Vohburg nehmen. An der ersten Ausfahrt rechts abbiegen. Kurz danach links über eine kleine Brücke abbiegen. Nach der Brücke rechts abbiegen. Das Werk ist sichtbar auf der linken Seite. Auf der A9 von Nürnberg kommend, Ausfahrt Ingolstadt Nord nehmen. An der Ampel links abbiegen. An der zweiten Ampel erneut links abbiegen. Der Straße folgen und rechts an der ersten Ausfahrt abbiegen. Kurz danach links über eine kleine Brücke abbiegen. Nach der Brücke rechts abbiegen. Das Werk ist sichtbar auf der linken Seite.

Technologien

Stamping

Roll-Forming

Joining

Produktionsfläche

14.800m²

Produktion der folgenden Komponenten:

  • Schweller
  • Querträger
  • Domstreben

Standort Dillenburg Manderbach

Im faulchen 4
35685 Dillenburg

Produktion der folgenden Komponenten:

  • Schweller
  • B-Säule
  • Cockpit

Standort Dillenburg

LINDE + WIEMANN Deutschland SE
Werk Dillenburg – Industriestraße 4-12
35683 Dillenburg
+49 2771 392-0

LINDE + WIEMANN SE & CO. KG
Postfach 15 54
35665 Dillenburg

Auf der Autobahn A45 die Ausfahrt 25 Dillenburg nehmen, dann von der B277 rechts abbiegen auf die B253 Richtung Frankenberg/Biedenkopf, dann bei der großen Ampelanlage zweimal rechts abbiegen auf die Industriestraße.

Technologien

Stamping

Roll-Forming

Joining

Hot-Forming

Produktionsfläche

17.900m²

Produktion der folgenden Komponenten:

  • Türaufprallstreben
  • Querträgerrohre
  • Verstärkungsbleche